Hi guys 
 

 

 I just want to know if it is possible to make a rollover baffle from a flat baffle when refacing???
 

 

 I tried many times on how to do it but unfortunately it just forms a concave-ish shape on the baffle..
 

 

 Anyone can help on how to do it?
 

 

 Thanks..

You need to open the tip to get enough material to shape a rollover.  Then you need to close the tip if it is too open.   Using epoxy or layers of lacquer (clear fingernail polish) can work to build up a rollover baffle.  But I do not really like how it turns out.

PayPal as "Personal, Friend or Family" to: sabradbury79@...
Checks made out to "Keith W. Bradbury"
Mail to:
Mojo Mouthpiece Work LLC
2925 Crane St.
Vineland, NJ 08361

> On Aug 5, 2016, at 11:27 AM, warren927736@... [MouthpieceWork] <MouthpieceWork@yahoogroups.com> wrote:
> 
> Hi guys 
> 
> 
> 
> 
> 
> I just want to know if it is possible to make a rollover baffle from a flat baffle when refacing???
> 
> 
> 
> 
> 
> I tried many times on how to do it but unfortunately it just forms a concave-ish shape on the baffle..
> 
> 
> 
> 
> 
> Anyone can help on how to do it?
> 
> 
> 
> 
> 
> Thanks..
> 
> 

Hi guys
 

 

 I just want to ask
 

 Is it possible to make a rollover baffle from a flat baffle when refacing? 
 

 

 I wanna know how to do it. Tried to file the baffle a time but it seems that nothing is happening..It just forms a sort of a concave shape on the baffle
 

 Anyone out there that can help?
 

 

 I'd would deeply appreciate it..
 

 

 Thanks