As I couldn't find any manufacturer where in Europe ( Germany) or China, US that sells good blanks , 
 I thought to post here.
 

 I am am looking to purchase a number of good HR tenor blanks , that have a good quality smelly Hard Rubber ..like the German or French ( I've got few German HR rods but not ready for working with Lathe yet :(
 

 Would be very welcome if those blanks have enough room for putting various openings from 6-8 to shape a longer or medium buffle and medium to large chamber and are big enough in diameter to accommodate most link / selmer type  ligatures.
  also  looking for metal tenor blanks with the same requirements.
 

 

 Hopefully some of you mouthpiece masters might have few still laying around :)
 

 Thanks in advance for your replies , feel free to email me directly at jazzroom@gmail.com
 

 

 Dimitri ( amsterdam ) 
 

My company is considering entering the mouthpiece blank business……do any of you have additional requirements other than those stated in this post? Most importantly, what is your budget per blank? We have some reservations about this being an economically viable business….



> On Aug 29, 2015, at 9:54 AM, jazzroom@... [MouthpieceWork] <MouthpieceWork@yahoogroups.com> wrote:
> 
> 
> As I couldn't find any manufacturer where in Europe ( Germany) or China, US that sells good blanks , 
> 
> I thought to post here.
> 
> 
> 
> I am am looking to purchase a number of good HR tenor blanks , that have a good quality smelly Hard Rubber ..like the German or French ( I've got few German HR rods but not ready for working with Lathe yet :(
> 
> 
> 
> Would be very welcome if those blanks have enough room for putting various openings from 6-8 to shape a longer or medium buffle and medium to large chamber and are big enough in diameter to accommodate most link / selmer type  ligatures.
> 
>  also  looking for metal tenor blanks with the same requirements.
> 
> 
> 
> 
> 
> Hopefully some of you mouthpiece masters might have few still laying around :)
> 
> 
> 
> Thanks in advance for your replies , feel free to email me directly at jazzroom@gmail.com <mailto:jazzroom@...>
> 
> 
> Dimitri ( amsterdam ) 
> 
> 
> 
> 
> 

Hi,
beeing from germany, I am also looking for blanks, basically same
requirements as described in the first mail.
What will you offer and when? Its about small numbers, maybe 10 rubber
blanks or so..
best regards
Jens

On 29.08.2015 17:24, STEVE GOODSON saxgourmet@... [MouthpieceWork]
wrote:
> My company is considering entering the mouthpiece blank business……do any of you have additional requirements other than those stated in this post? Most importantly, what is your budget per blank? We have some reservations about this being an economically viable business….
>
>
>
>> On Aug 29, 2015, at 9:54 AM, jazzroom@... [MouthpieceWork] <MouthpieceWork@yahoogroups.com> wrote:
>>
>>
>> As I couldn't find any manufacturer where in Europe ( Germany) or China, US that sells good blanks , 
>>
>> I thought to post here.
>>
>>
>>
>> I am am looking to purchase a number of good HR tenor blanks , that have a good quality smelly Hard Rubber ..like the German or French ( I've got few German HR rods but not ready for working with Lathe yet :(
>>
>>
>>
>> Would be very welcome if those blanks have enough room for putting various openings from 6-8 to shape a longer or medium buffle and medium to large chamber and are big enough in diameter to accommodate most link / selmer type  ligatures.
>>
>>  also  looking for metal tenor blanks with the same requirements.
>>
>>
>>
>>
>>
>> Hopefully some of you mouthpiece masters might have few still laying around :)
>>
>>
>>
>> Thanks in advance for your replies , feel free to email me directly at jazzroom@... <mailto:jazzroom@...>
>>
>>
>> Dimitri ( amsterdam ) 
>>
>>
>>
>>
>>
>

and your budget is……….? Until we figure out the economics, I’m not going to spend the money to tool up……..


> On Aug 29, 2015, at 10:31 AM, Jens Erler mothbox@... [MouthpieceWork] <MouthpieceWork@yahoogroups.com> wrote:
> 
> Hi,
> beeing from germany, I am also looking for blanks, basically same
> requirements as described in the first mail.
> What will you offer and when? Its about small numbers, maybe 10 rubber
> blanks or so..
> best regards
> Jens
> 
> On 29.08.2015 17:24, STEVE GOODSON saxgourmet@... <mailto:saxgourmet@...> [MouthpieceWork]
> wrote:
> > My company is considering entering the mouthpiece blank business……do any of you have additional requirements other than those stated in this post? Most importantly, what is your budget per blank? We have some reservations about this being an economically viable business….
> >
> >
> >
> >> On Aug 29, 2015, at 9:54 AM, jazzroom@... [MouthpieceWork] <MouthpieceWork@yahoogroups.com> wrote:
> >>
> >>
> >> As I couldn't find any manufacturer where in Europe ( Germany) or China, US that sells good blanks , 
> >>
> >> I thought to post here.
> >>
> >>
> >>
> >> I am am looking to purchase a number of good HR tenor blanks , that have a good quality smelly Hard Rubber ..like the German or French ( I've got few German HR rods but not ready for working with Lathe yet :(
> >>
> >>
> >>
> >> Would be very welcome if those blanks have enough room for putting various openings from 6-8 to shape a longer or medium buffle and medium to large chamber and are big enough in diameter to accommodate most link / selmer type ligatures.
> >>
> >> also looking for metal tenor blanks with the same requirements.
> >>
> >>
> >>
> >>
> >>
> >> Hopefully some of you mouthpiece masters might have few still laying around :)
> >>
> >>
> >>
> >> Thanks in advance for your replies , feel free to email me directly at jazzroom@... <mailto:jazzroom@...> <mailto:jazzroom@gmail.com <mailto:jazzroom@...>>
> >>
> >>
> >> Dimitri ( amsterdam ) 
> >>
> >>
> >>
> >>
> >>
> >
> 
> 
> 

I can do you some at small quantities and I'm in Europe. email me and we can talk details. cheers
 Morgan