Hi Guys

Could anyone share the measurements of an alto Beechler Bellite #7 mouthpiece? factory preset?

Thanks!

It is hard to tell what they are suppose to be.  All the tip openings and curves that have been through this shop have varied for a #7.

--- In MouthpieceWork@yahoogroups.com, "soruyoavila" <soruyoavila@...> wrote:
>
> Hi Guys
> 
> Could anyone share the measurements of an alto Beechler Bellite #7 mouthpiece? factory preset?
> 
> Thanks!
>

Thank you for aswering! Well, at least how long is the facing curve? they must be very the same.....let´s say....around 20mm? less?

Thanks again.



--- In MouthpieceWork@yahoogroups.com, "gregwier" <gregwier@...> wrote:
>
> It is hard to tell what they are suppose to be.  All the tip openings and curves that have been through this shop have varied for a #7.
> 
> --- In MouthpieceWork@yahoogroups.com, "soruyoavila" <soruyoavila@> wrote:
> >
> > Hi Guys
> > 
> > Could anyone share the measurements of an alto Beechler Bellite #7 mouthpiece? factory preset?
> > 
> > Thanks!
> >
>

23 to 24 mm is what I have on file for this facing and tip openings have varied from .085" to .092"

--- In MouthpieceWork@yahoogroups.com, "soruyoavila" <soruyoavila@...> wrote:
>
> Thank you for aswering! Well, at least how long is the facing curve? they must be very the same.....let´s say....around 20mm? less?
> 
> Thanks again.
> 
> 
> 
> --- In MouthpieceWork@yahoogroups.com, "gregwier" <gregwier@> wrote:
> >
> > It is hard to tell what they are suppose to be.  All the tip openings and curves that have been through this shop have varied for a #7.
> > 
> > --- In MouthpieceWork@yahoogroups.com, "soruyoavila" <soruyoavila@> wrote:
> > >
> > > Hi Guys
> > > 
> > > Could anyone share the measurements of an alto Beechler Bellite #7 mouthpiece? factory preset?
> > > 
> > > Thanks!
> > >
> >
>

I don´t have a 7, but a Bellite Custom 5 that I have modified several times. First facing length 44/tip opening 0.080 (#6#), then I reduced it to facing length 39/opening 0.078. I find this one plays best with a shorter facing length, (almost as  it originally had), but with a facing curve that not longer is uneven, and slightly flatter at the start that is was. 

EgilF.


--- In MouthpieceWork@yahoogroups.com, "gregwier" <gregwier@...> wrote:
>
> 23 to 24 mm is what I have on file for this facing and tip openings have varied from .085" to .092"
> 
> --- In MouthpieceWork@yahoogroups.com, "soruyoavila" <soruyoavila@> wrote:
> >
> > Thank you for aswering! Well, at least how long is the facing curve? they must be very the same.....let´s say....around 20mm? less?
> > 
> > Thanks again.
> > 
> > 
> > 
> > --- In MouthpieceWork@yahoogroups.com, "gregwier" <gregwier@> wrote:
> > >
> > > It is hard to tell what they are suppose to be.  All the tip openings and curves that have been through this shop have varied for a #7.
> > > 
> > > --- In MouthpieceWork@yahoogroups.com, "soruyoavila" <soruyoavila@> wrote:
> > > >
> > > > Hi Guys
> > > > 
> > > > Could anyone share the measurements of an alto Beechler Bellite #7 mouthpiece? factory preset?
> > > > 
> > > > Thanks!
> > > >
> > >
> >
>