Is anyone aware of any commercially made table top pantographs (1 to 1)(also called a duplicator). I've searched far and wide and haven't even seen any references to a machine like this. Before I think of constructing one, I'm sending a shout out. 
A one to one table top pantograph would be ideal for duplicating someones favorite mouthpiece without having to go through the tedium of digitizing to cut on a CNC. 
 Thanks,
Paul Spezio

Sears used to sell some kind of gizmo like this for a pin router to duplicate 
wood carvings.  I do not think it would work well at duplicating the entire 
geometry including the interior.




________________________________
From: paul.spezio <paul.spezio@...>
To: MouthpieceWork@yahoogroups.com
Sent: Thu, December 23, 2010 11:59:20 AM
Subject: [MouthpieceWork] Machining .. pantograph-duplicator

  
Is anyone aware of any commercially made table top pantographs (1 to 1)(also 
called a duplicator). I've searched far and wide and haven't even seen any 
references to a machine like this. Before I think of constructing one, I'm 
sending a shout out. 

A one to one table top pantograph would be ideal for duplicating someones 
favorite mouthpiece without having to go through the tedium of digitizing to cut 
on a CNC. 

Thanks,
Paul Spezio





      

Milescraft do a router pantograph, but I don’t think it would be accurate enough for a mouthpiece. Might be useful for making rough blanks.

Tony F.

 

From: MouthpieceWork@yahoogroups.com [mailto:MouthpieceWork@yahoogroups.com] On Behalf Of Keith Bradbury
Sent: Friday, 24 December 2010 6:44 AM
To: MouthpieceWork@yahoogroups.com
Subject: Re: [MouthpieceWork] Machining .. pantograph-duplicator

 

  

Sears used to sell some kind of gizmo like this for a pin router to duplicate wood carvings.  I do not think it would work well at duplicating the entire geometry including the interior.

 

  _____  

From: paul.spezio <paul.spezio@...>
To: MouthpieceWork@yahoogroups.com
Sent: Thu, December 23, 2010 11:59:20 AM
Subject: [MouthpieceWork] Machining .. pantograph-duplicator

  

Is anyone aware of any commercially made table top pantographs (1 to 1)(also called a duplicator). I've searched far and wide and haven't even seen any references to a machine like this. Before I think of constructing one, I'm sending a shout out. 
A one to one table top pantograph would be ideal for duplicating someones favorite mouthpiece without having to go through the tedium of digitizing to cut on a CNC. 
Thanks,
Paul Spezio

 




  _____  

I am using the Free version of SPAMfighter <http://www.spamfighter.com/len> .
SPAMfighter has removed 749 of my spam emails to date.

Do you have a slow PC? <http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>  Try free scan!