Sorry this isn't a mouthpiece question, but I figure with the number of saxophone guys here, I might find an answer.

 I e-mailed Jason Dumars a week ago inquiring about engraving work for my Mark VII alto that is being converted to a one-handed mechanism.  But I have not received a response as of yet.  Does anyone know of an alternative contact for him? all I have found was from his site:jason@...

The builder converting my sax is planning on sending my bell off to another engrver, but I would rather send my horn to Jason to have the works done to it, not just the bell touched up and added to in a traditional fashion.  I'm not going to have a traditional horn, so I don't want traditional engraving :-)

Thanks
 Daniel
 




 		 	   		  
_________________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. 
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5

Jason DuMars <jdumars@...>

He is on Facebook too.




________________________________
From: Daniel Stover <kasparguy@...>
To: mouthpiecework@yahoogroups.com
Sent: Wed, June 2, 2010 8:29:43 AM
Subject: [MouthpieceWork] slightly OT: Saxophone engraving

  

Sorry this isn't a mouthpiece question, but I figure with the number of saxophone guys here, I might find an answer.

 I e-mailed Jason Dumars a week ago inquiring about engraving work for my Mark VII alto that is being converted to a one-handed mechanism.  But I have not received a response as of yet.  Does anyone know of an alternative contact for him? all I have found was from his site:jason@...

The builder converting my sax is planning on sending my bell off to another engrver, but I would rather send my horn to Jason to have the works done to it, not just the bell touched up and added to in a traditional fashion.  I'm not going to have a traditional horn, so I don't want traditional engraving :-)

Thanks
 Daniel
 


__________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. 
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5



      

Thanks Keith.. I just tried that address.. I had looked for him on Facebook. but the only hit didn't look like the guy pictured on the bio page on his website so  was reluctant to try sdding a total stranger and it not be the right person.. 












________________________________
> To: MouthpieceWork@yahoogroups.com
> From: kwbradbury@...
> Date: Wed, 2 Jun 2010 06:43:03 -0700
> Subject: Re: [MouthpieceWork] slightly OT: Saxophone engraving
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Jason DuMars>
>
>
>
> He is on Facebook too.
>
>
>
>
>
>
> ________________________________
>
> From: Daniel Stover
> To: mouthpiecework@yahoogroups.com
> Sent: Wed, June 2, 2010 8:29:43 AM
> Subject: [MouthpieceWork] slightly OT: Saxophone engraving
>
>
>
>
> Sorry this isn't a mouthpiece question, but I figure with the number of saxophone guys here, I might find an answer.
>
> I e-mailed Jason Dumars a week ago inquiring about engraving work for my Mark VII alto that is being converted to a one-handed mechanism. But I have not received a response as of yet. Does anyone know of an alternative contact for him? all I have found was from his site:jason@...
>
> The builder converting my sax is planning on sending my bell off to another engrver, but I would rather send my horn to Jason to have the works done to it, not just the bell touched up and added to in a traditional fashion. I'm not going to have a traditional horn, so I don't want traditional engraving
> :-)
>
> Thanks
> Daniel
>
>
>
> __________________________________________________________
> The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail.
> http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> 
>
>
>
>
>
>
>
 		 	   		  
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4

http://www.facebook.com/jasondumars



----- Original Message ----
From: Daniel Stover <kasparguy@...>
To: mouthpiecework@yahoogroups.com
Sent: Wed, June 2, 2010 10:04:09 AM
Subject: RE: [MouthpieceWork] slightly OT: Saxophone engraving


Thanks Keith.. I just tried that address.. I had looked for him on Facebook. but the only hit didn't look like the guy pictured on the bio page on his website so  was reluctant to try sdding a total stranger and it not be the right person.. 


      

You could try to find him at Standard Insurance in Portland, OR. I don't 
know if he works there any more. He is probably long gone. It would be 
the IT or IT infrastructure department.
Toll-Free Phone: (800) 368-7505


Daniel Stover wrote:
>
>
> Sorry this isn't a mouthpiece question, but I figure with the number 
> of saxophone guys here, I might find an answer.
>
> I e-mailed Jason Dumars a week ago inquiring about engraving work for 
> my Mark VII alto that is being converted to a one-handed mechanism. 
> But I have not received a response as of yet. Does anyone know of an 
> alternative contact for him? all I have found was from his 
> site:jason@... <mailto:jason%40dumarsengraving.com>
>
> The builder converting my sax is planning on sending my bell off to 
> another engrver, but I would rather send my horn to Jason to have the 
> works done to it, not just the bell touched up and added to in a 
> traditional fashion. I'm not going to have a traditional horn, so I 
> don't want traditional engraving :-)
>
> Thanks
> Daniel
>
>
>
> __________________________________________________________
> The New Busy think 9 to 5 is a cute idea. Combine multiple calendars 
> with Hotmail.
> http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5 
> <http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5>
>
>