On my alto I have a NY Meyer hand finished by Frank Wells and there is no effort at all blowing this MPC on ANY alto.
Ted

Ted, have you measured that Meyer to determine the curve, and tip opening? If so, would you be willing to post those measurements here? Thanks, 
Doug 

----- Original Message ----- 
From: "Ted Maciag" <maciagt@...> 
To: MouthpieceWork@yahoogroups.com 
Sent: Thursday, November 12, 2009 11:50:59 AM GMT -06:00 US/Canada Central 
Subject: [MouthpieceWork] Free Blowing MPC 






On my alto I have a NY Meyer hand finished by Frank Wells and there is no effort at all blowing this MPC on ANY alto. 


Ted 

I have found a radial facing curve with a long facing length to be the most free-blowing.  Perhaps too free-blowing unless the tip opening is wide.

Wow this really sucks. I wrote responses 2x and the pop-up from Yahoo asking about sharing/ rich text option comes up, I make my choice and preview my message, try to go back to edit...I lose everything. What's the deal here? 
--- In MouthpieceWork@yahoogroups.com, "MojoBari" <kwbradbury@...> wrote:
>
> I have found a radial facing curve with a long facing length to be the most free-blowing.  Perhaps too free-blowing unless the tip opening is wide.
>

I have no control over Yahoo issues (that I know of).  I have not experienced what you are describing.  Are you responding via Email or via the group site?  Both should work but on may work better for you.

I would also suggest composing long replies in a word processor so you do not lose everything because of a glitch.  After composing, just cut/paste the reply to the group.




________________________________
From: maddahorn <maddahorn@...>
To: MouthpieceWork@yahoogroups.com
Sent: Fri, November 13, 2009 7:43:50 AM
Subject: [MouthpieceWork] Re: Free Blowing MPC

  

Wow this really sucks. I wrote responses 2x and the pop-up from Yahoo asking about sharing/ rich text option comes up, I make my choice and preview my message, try to go back to edit...I lose everything. What's the deal here?