I just bought two digital gauges from member David Kulcinski.  These 
are used, but good working gauges.  These are the "Logic Basic 
Series" made by CDI Chicago.  

The gauges can be set for mm's or inches.

They fit perfectly in the fixtures I got from Steve Fowler and my 
original Winslow tip gauge.

The neat thing... with the needle type gauges, I had to count 
backwards to determine the tip opening as the probe dropped below the 
zero (which was the plane of the mouthpiece table).  

With these digital gauges I can place the gauge/fixture on my glass 
work surface, zero the gauge.  Then place on the mouthpiece and read 
the tip opening as, for example, -.098".  No counting back, no 
subtraction, just a direct reading.

I'll let David post purchase details.  

I liked the first one so much I bought a second one.

Paul

There is a 2nd function that reverses the measurement direction.  This will give all positive indications.

I have 12 gauges that I would be happy to sell to the first 12 respondents.  They are used, but are in working order.  The cost is $25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be determined upon furnishing mailing address information.  They are warranted for 30 days.  If, for any reason, you are not satisfied, return gauge postage paid for a full refund minus S&H.

There is a picture of a typical gauge in the photos section in the "Digital Gauge" album.

Thank you,

David



----- Original Message ----
From: tenorman1952 <tenorman1952@...>
To: MouthpieceWork@yahoogroups.com
Sent: Saturday, August 2, 2008 10:11:10 AM
Subject: [MouthpieceWork] Digital gauges for tip opening


I just bought two digital gauges from member David Kulcinski.  These 
are used, but good working gauges.  These are the "Logic Basic 
Series" made by CDI Chicago. 

The gauges can be set for mm's or inches.

They fit perfectly in the fixtures I got from Steve Fowler and my 
original Winslow tip gauge.

The neat thing... with the needle type gauges, I had to count 
backwards to determine the tip opening as the probe dropped below the 
zero (which was the plane of the mouthpiece table). 

With these digital gauges I can place the gauge/fixture on my glass 
work surface, zero the gauge.  Then place on the mouthpiece and read 
the tip opening as, for example, -.098".  No counting back, no 
subtraction, just a direct reading.

I'll let David post purchase details. 

I liked the first one so much I bought a second one.

Paul

    


      

Hi,

What would be the shipping rate for Argentina? I'd like to buy one of
your gauges.

Best regards,

Luis Pablo

--- In MouthpieceWork@yahoogroups.com, David Kulcinski
<dkulcinski@...> wrote:
>
> There is a 2nd function that reverses the measurement direction. 
This will give all positive indications.
> 
> I have 12 gauges that I would be happy to sell to the first 12
respondents.  They are used, but are in working order.  The cost is
$25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be
determined upon furnishing mailing address information.  They are
warranted for 30 days.  If, for any reason, you are not satisfied,
return gauge postage paid for a full refund minus S&H.
> 
> There is a picture of a typical gauge in the photos section in the
"Digital Gauge" album.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message ----
> From: tenorman1952 <tenorman1952@...>
> To: MouthpieceWork@yahoogroups.com
> Sent: Saturday, August 2, 2008 10:11:10 AM
> Subject: [MouthpieceWork] Digital gauges for tip opening
> 
> 
> I just bought two digital gauges from member David Kulcinski.  These 
> are used, but good working gauges.  These are the "Logic Basic 
> Series" made by CDI Chicago. 
> 
> The gauges can be set for mm's or inches.
> 
> They fit perfectly in the fixtures I got from Steve Fowler and my 
> original Winslow tip gauge.
> 
> The neat thing... with the needle type gauges, I had to count 
> backwards to determine the tip opening as the probe dropped below the 
> zero (which was the plane of the mouthpiece table). 
> 
> With these digital gauges I can place the gauge/fixture on my glass 
> work surface, zero the gauge.  Then place on the mouthpiece and read 
> the tip opening as, for example, -.098".  No counting back, no 
> subtraction, just a direct reading.
> 
> I'll let David post purchase details. 
> 
> I liked the first one so much I bought a second one.
> 
> Paul
>

I will check and let you know.

Thank you for your interest,

David



----- Original Message ----
From: luispa8 <luispa8@...>
To: MouthpieceWork@yahoogroups.com
Sent: Sunday, August 3, 2008 11:53:04 AM
Subject: [MouthpieceWork] Re: Digital gauges for tip opening


Hi,

What would be the shipping rate for Argentina? I'd like to buy one of
your gauges.

Best regards,

Luis Pablo

--- In MouthpieceWork@ yahoogroups. com, David Kulcinski
<dkulcinski@ ...> wrote:
>
> There is a 2nd function that reverses the measurement direction. 
This will give all positive indications.
> 
> I have 12 gauges that I would be happy to sell to the first 12
respondents.  They are used, but are in working order.  The cost is
$25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be
determined upon furnishing mailing address information.  They are
warranted for 30 days.  If, for any reason, you are not satisfied,
return gauge postage paid for a full refund minus S&H.
> 
> There is a picture of a typical gauge in the photos section in the
"Digital Gauge" album.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message ----
> From: tenorman1952 <tenorman1952@ ...>
> To: MouthpieceWork@ yahoogroups. com
> Sent: Saturday, August 2, 2008 10:11:10 AM
> Subject: [MouthpieceWork] Digital gauges for tip opening
> 
> 
> I just bought two digital gauges from member David Kulcinski.  These 
> are used, but good working gauges.  These are the "Logic Basic 
> Series" made by CDI Chicago. 
> 
> The gauges can be set for mm's or inches.
> 
> They fit perfectly in the fixtures I got from Steve Fowler and my 
> original Winslow tip gauge.
> 
> The neat thing... with the needle type gauges, I had to count 
> backwards to determine the tip opening as the probe dropped below the 
> zero (which was the plane of the mouthpiece table). 
> 
> With these digital gauges I can place the gauge/fixture on my glass 
> work surface, zero the gauge.  Then place on the mouthpiece and read 
> the tip opening as, for example, -.098".  No counting back, no 
> subtraction, just a direct reading.
> 
> I'll let David post purchase details. 
> 
> I liked the first one so much I bought a second one.
> 
> Paul
>

    


      

Luis,

I checked with the Post Office and Express Mail is USD $30.50.  First Class Parcel is USD $8.25.  Please let me know how you would like me to ship it.

Thank you,

David



----- Original Message ----
From: luispa8 <luispa8@...>
To: MouthpieceWork@yahoogroups.com
Sent: Sunday, August 3, 2008 11:53:04 AM
Subject: [MouthpieceWork] Re: Digital gauges for tip opening


Hi,

What would be the shipping rate for Argentina? I'd like to buy one of
your gauges.

Best regards,

Luis Pablo

--- In MouthpieceWork@ yahoogroups. com, David Kulcinski
<dkulcinski@ ...> wrote:
>
> There is a 2nd function that reverses the measurement direction. 
This will give all positive indications.
> 
> I have 12 gauges that I would be happy to sell to the first 12
respondents.  They are used, but are in working order.  The cost is
$25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be
determined upon furnishing mailing address information.  They are
warranted for 30 days.  If, for any reason, you are not satisfied,
return gauge postage paid for a full refund minus S&H.
> 
> There is a picture of a typical gauge in the photos section in the
"Digital Gauge" album.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message ----
> From: tenorman1952 <tenorman1952@ ...>
> To: MouthpieceWork@ yahoogroups. com
> Sent: Saturday, August 2, 2008 10:11:10 AM
> Subject: [MouthpieceWork] Digital gauges for tip opening
> 
> 
> I just bought two digital gauges from member David Kulcinski.  These 
> are used, but good working gauges.  These are the "Logic Basic 
> Series" made by CDI Chicago. 
> 
> The gauges can be set for mm's or inches.
> 
> They fit perfectly in the fixtures I got from Steve Fowler and my 
> original Winslow tip gauge.
> 
> The neat thing... with the needle type gauges, I had to count 
> backwards to determine the tip opening as the probe dropped below the 
> zero (which was the plane of the mouthpiece table). 
> 
> With these digital gauges I can place the gauge/fixture on my glass 
> work surface, zero the gauge.  Then place on the mouthpiece and read 
> the tip opening as, for example, -.098".  No counting back, no 
> subtraction, just a direct reading.
> 
> I'll let David post purchase details. 
> 
> I liked the first one so much I bought a second one.
> 
> Paul
>

    


      

Hi David,
   Parcel at $8.25 is fine. I'll owe you $3.25. Can I do that on PayPal or  does it cost more than it is worth. Let me know what you prefer me to do.    Thank you, Peter

--- On Tue, 8/5/08, David Kulcinski <dkulcinski@...> wrote:
From: David Kulcinski <dkulcinski@yahoo.com>
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening
To: MouthpieceWork@yahoogroups.com
Date: Tuesday, August 5, 2008, 4:29 PM










    
            Luis,

I checked with the Post Office and Express Mail is USD $30.50.  First Class Parcel is USD $8.25.  Please let me know how you would like me to ship it.

Thank you,

David

----- Original Message ----
From: luispa8 <luispa8@yahoo. com.ar>
To: MouthpieceWork@ yahoogroups. com
Sent: Sunday, August 3, 2008 11:53:04 AM
Subject: [MouthpieceWork] Re: Digital gauges for tip opening










    
            Hi,



What would be the shipping rate for Argentina? I'd like to buy one of

your gauges.



Best regards,



Luis Pablo



--- In MouthpieceWork@ yahoogroups. com, David Kulcinski

<dkulcinski@ ...> wrote:

>

> There is a 2nd function that reverses the measurement direction. 

This will give all positive indications.

> 

> I have 12 gauges that I would be happy to sell to the first 12

respondents.  They are used, but are in working order.  The cost is

$25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be

determined upon furnishing mailing address information.  They are

warranted for 30 days.  If, for any reason, you are not satisfied,

return gauge postage paid for a full refund minus S&H.

> 

> There is a picture of a typical gauge in the photos section in the

"Digital Gauge" album.

> 

> Thank you,

> 

> David

> 

> 

> 

> ----- Original Message ----

> From: tenorman1952 <tenorman1952@ ...>

> To: MouthpieceWork@ yahoogroups. com

> Sent: Saturday, August 2, 2008 10:11:10 AM

> Subject: [MouthpieceWork] Digital gauges for tip opening

> 

> 

> I just bought two digital gauges from member David Kulcinski.  These 

> are used, but good working gauges.  These are the "Logic Basic 

> Series" made by CDI Chicago. 

> 

> The gauges can be set for mm's or inches.

> 

> They fit perfectly in the fixtures I got from Steve Fowler and my 

> original Winslow tip gauge.

> 

> The neat thing... with the needle type gauges, I had to count 

> backwards to determine the tip opening as the probe dropped below the 

> zero (which was the plane of the mouthpiece table). 

> 

> With these digital gauges I can place the gauge/fixture on my glass 

> work surface, zero the gauge.  Then place on the mouthpiece and read 

> the tip opening as, for example, -.098".  No counting back, no 

> subtraction, just a direct reading.

> 

> I'll let David post purchase details. 

> 

> I liked the first one so much I bought a second one.

> 

> Paul

>




      


	
	


      
      

    
    
	
	 
	
	








	


	
	


      

Hi David,

I'd like to get one of these gauges.  Shipping to Singapore.

Regards,
Christian



----- Original Message ----
From: David Kulcinski <dkulcinski@...>
To: MouthpieceWork@yahoogroups.com
Sent: Wednesday, 6 August 2008 7:29:16
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


Luis,

I checked with the Post Office and Express Mail is USD $30.50.  First Class Parcel is USD $8.25.  Please let me know how you would like me to ship it.

Thank you,

David



----- Original Message ----
From: luispa8 <luispa8@...>
To: MouthpieceWork@yahoogroups.com
Sent: Sunday, August 3, 2008 11:53:04 AM
Subject: [MouthpieceWork] Re: Digital gauges for tip opening


Hi,

What would be the shipping rate for Argentina? I'd like to buy one of
your gauges.

Best regards,

Luis Pablo

--- In MouthpieceWork@ yahoogroups. com, David Kulcinski
<dkulcinski@ ...> wrote:
>
> There is a 2nd function that reverses the measurement direction. 
This will give all positive indications.
> 
> I have 12 gauges that I would be happy to sell to the first 12
respondents.  They are used, but are in working order.  The cost is
$25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be
determined upon furnishing mailing address information.  They are
warranted for 30 days.  If, for any reason, you are not satisfied,
return gauge postage paid for a full refund minus S&H.
> 
> There is a picture of a typical gauge in the photos section in the
"Digital Gauge" album.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message ----
> From: tenorman1952 <tenorman1952@ ...>
> To: MouthpieceWork@ yahoogroups. com
> Sent: Saturday, August 2, 2008 10:11:10 AM
> Subject: [MouthpieceWork] Digital gauges for tip opening
> 
> 
> I just bought two digital gauges from member David Kulcinski.  These 
> are used, but good working gauges.  These are the "Logic Basic 
> Series" made by CDI Chicago. 
> 
> The gauges can be set for mm's or inches.
> 
> They fit perfectly in the fixtures I got from Steve Fowler and my 
> original Winslow tip gauge.
> 
> The neat thing... with the needle type gauges, I had to count 
> backwards to determine the tip opening as the probe dropped below the 
> zero (which was the plane of the mouthpiece table). 
> 
> With these digital gauges I can place the gauge/fixture on my glass 
> work surface, zero the gauge.  Then place on the mouthpiece and read 
> the tip opening as, for example, -.098".  No counting back, no 
> subtraction, just a direct reading.
> 
> I'll let David post purchase details. 
> 
> I liked the first one so much I bought a second one.
> 
> Paul
>


 


      New Email names for you! 
Get the Email name you've always wanted on the new @ymail and @rocketmail. 
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/sg/

I will take one, too. Thanks. mark

Mark & Kerry Weinstein, Proprietors
WEINSTEIN WOODWINDS
6422B North Santa Fe Avenue
Oklahoma City, OK  USA

----- Original Message ----- 
  From: christian loh 
  To: MouthpieceWork@yahoogroups.com 
  Sent: Tuesday, August 05, 2008 8:01 PM
  Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening



  Hi David,

  I'd like to get one of these gauges.  Shipping to Singapore.

  Regards,
  Christian



  ----- Original Message ----
  From: David Kulcinski <dkulcinski@...>
  To: MouthpieceWork@yahoogroups.com
  Sent: Wednesday, 6 August 2008 7:29:16
  Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


  Luis,

  I checked with the Post Office and Express Mail is USD $30.50.  First Class Parcel is USD $8.25.  Please let me know how you would like me to ship it.

  Thank you,

  David



  ----- Original Message ----
  From: luispa8 <luispa8@...>
  To: MouthpieceWork@yahoogroups.com
  Sent: Sunday, August 3, 2008 11:53:04 AM
  Subject: [MouthpieceWork] Re: Digital gauges for tip opening


  Hi,

  What would be the shipping rate for Argentina? I'd like to buy one of
  your gauges.

  Best regards,

  Luis Pablo

  --- In MouthpieceWork@ yahoogroups. com, David Kulcinski
  <dkulcinski@ ...> wrote:
  >
  > There is a 2nd function that reverses the measurement direction. 
  This will give all positive indications.
  > 
  > I have 12 gauges that I would be happy to sell to the first 12
  respondents. They are used, but are in working order. The cost is
  $25.00 + $5.00 S&H + insurance to the USA. Overseas postage will be
  determined upon furnishing mailing address information. They are
  warranted for 30 days. If, for any reason, you are not satisfied,
  return gauge postage paid for a full refund minus S&H.
  > 
  > There is a picture of a typical gauge in the photos section in the
  "Digital Gauge" album.
  > 
  > Thank you,
  > 
  > David
  > 
  > 
  > 
  > ----- Original Message ----
  > From: tenorman1952 <tenorman1952@ ...>
  > To: MouthpieceWork@ yahoogroups. com
  > Sent: Saturday, August 2, 2008 10:11:10 AM
  > Subject: [MouthpieceWork] Digital gauges for tip opening
  > 
  > 
  > I just bought two digital gauges from member David Kulcinski. These 
  > are used, but good working gauges. These are the "Logic Basic 
  > Series" made by CDI Chicago. 
  > 
  > The gauges can be set for mm's or inches.
  > 
  > They fit perfectly in the fixtures I got from Steve Fowler and my 
  > original Winslow tip gauge.
  > 
  > The neat thing... with the needle type gauges, I had to count 
  > backwards to determine the tip opening as the probe dropped below the 
  > zero (which was the plane of the mouthpiece table). 
  > 
  > With these digital gauges I can place the gauge/fixture on my glass 
  > work surface, zero the gauge. Then place on the mouthpiece and read 
  > the tip opening as, for example, -.098". No counting back, no 
  > subtraction, just a direct reading.
  > 
  > I'll let David post purchase details. 
  > 
  > I liked the first one so much I bought a second one.
  > 
  > Paul
  >







------------------------------------------------------------------------------
  Get your new Email address! 
  Grab the Email name you've always wanted before someone else does!

   

David,

this is Gian and this is my new contact on MouthpieceWork Group.
don't write me anymore on cubismofree@..., is no more active
from yesterday.

The price for shipping you post for Argentina seems the same for
Europe. Due to the low price of the gauge, sure the shipping as
Priority and not Express is good for me resident in Italy.

So, just tell me how to pay and total due. When do you think you will
ship the gauge? I'm ready to pay using paypal. Do you have?

Thanks to let me know.
Grazie e ciao.
Gian


--- In MouthpieceWork@yahoogroups.com, David Kulcinski
<dkulcinski@...> wrote:
>
> Luis,
> 
> I checked with the Post Office and Express Mail is USD $30.50. 
First Class Parcel is USD $8.25.  Please let me know how you would
like me to ship it.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message ----
> From: luispa8 <luispa8@...>
> To: MouthpieceWork@yahoogroups.com
> Sent: Sunday, August 3, 2008 11:53:04 AM
> Subject: [MouthpieceWork] Re: Digital gauges for tip opening
> 
> 
> Hi,
> 
> What would be the shipping rate for Argentina? I'd like to buy one of
> your gauges.
> 
> Best regards,
> 
> Luis Pablo
> 
> --- In MouthpieceWork@ yahoogroups. com, David Kulcinski
> <dkulcinski@ ...> wrote:
> >
> > There is a 2nd function that reverses the measurement direction. 
> This will give all positive indications.
> > 
> > I have 12 gauges that I would be happy to sell to the first 12
> respondents.  They are used, but are in working order.  The cost is
> $25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be
> determined upon furnishing mailing address information.  They are
> warranted for 30 days.  If, for any reason, you are not satisfied,
> return gauge postage paid for a full refund minus S&H.
> > 
> > There is a picture of a typical gauge in the photos section in the
> "Digital Gauge" album.
> > 
> > Thank you,
> > 
> > David
> > 
> > 
> > 
> > ----- Original Message ----
> > From: tenorman1952 <tenorman1952@ ...>
> > To: MouthpieceWork@ yahoogroups. com
> > Sent: Saturday, August 2, 2008 10:11:10 AM
> > Subject: [MouthpieceWork] Digital gauges for tip opening
> > 
> > 
> > I just bought two digital gauges from member David Kulcinski.  These 
> > are used, but good working gauges.  These are the "Logic Basic 
> > Series" made by CDI Chicago. 
> > 
> > The gauges can be set for mm's or inches.
> > 
> > They fit perfectly in the fixtures I got from Steve Fowler and my 
> > original Winslow tip gauge.
> > 
> > The neat thing... with the needle type gauges, I had to count 
> > backwards to determine the tip opening as the probe dropped below the 
> > zero (which was the plane of the mouthpiece table). 
> > 
> > With these digital gauges I can place the gauge/fixture on my glass 
> > work surface, zero the gauge.  Then place on the mouthpiece and read 
> > the tip opening as, for example, -.098".  No counting back, no 
> > subtraction, just a direct reading.
> > 
> > I'll let David post purchase details. 
> > 
> > I liked the first one so much I bought a second one.
> > 
> > Paul
> >
>

The gauge is $25 +$5.00 S&H (First Class Parcel) to dkulcinski@....  Please no credit cards; only PayPal.

Thank you,

David



----- Original Message ----
From: "kweinstein1@..." <kweinstein1@...>
To: MouthpieceWork@yahoogroups.com
Sent: Tuesday, August 5, 2008 8:42:00 PM
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


 
I will take one, too. Thanks. mark
 
Mark & Kerry Weinstein, Proprietors
WEINSTEIN 
WOODWINDS
6422B North Santa Fe Avenue
Oklahoma City, OK  
USA

----- Original Message ----- 
From: christian  loh 
To: MouthpieceWork@ yahoogroups. com 
Sent: Tuesday, August 05, 2008 8:01  PM
Subject: Re: [MouthpieceWork] Re: Digital  gauges for tip opening

Hi David,

I'd like to get one of these gauges.  Shipping to  Singapore.

Regards,
Christian



-----  Original Message ----
From: David Kulcinski <dkulcinski@yahoo. com>
To: MouthpieceWork@ yahoogroups. com
Sent:  Wednesday, 6 August 2008 7:29:16
Subject: Re: [MouthpieceWork] Re: Digital  gauges for tip opening


Luis,

I checked with the Post Office and Express Mail is USD  $30.50.  First Class Parcel is USD $8.25.  Please let me know how  you would like me to ship it.

Thank you,

David



-----  Original Message ----
From: luispa8  <luispa8@yahoo. com.ar>
To:  MouthpieceWork@ yahoogroups. com
Sent: Sunday, August 3, 2008  11:53:04 AM
Subject: [MouthpieceWork] Re: Digital gauges for tip  opening


Hi,

What would be the shipping rate for Argentina? I'd like to buy  one of
your gauges.

Best regards,

Luis Pablo

--- In MouthpieceWork@ yahoogroups.  com, David Kulcinski
<dkulcinski@ ...> wrote:
>
>  There is a 2nd function that reverses the measurement direction. 
This will  give all positive indications.
> 
> I have 12 gauges that I would  be happy to sell to the first 12
respondents. They are used, but are in  working order. The cost is
$25.00 + $5.00 S&H + insurance to the USA.  Overseas postage will be
determined upon furnishing mailing address  information. They are
warranted for 30 days. If, for any reason, you are  not satisfied,
return gauge postage paid for a full refund minus  S&H.
> 
> There is a picture of a typical gauge in the photos  section in the
"Digital Gauge" album.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message  ----
> From: tenorman1952 <tenorman1952@ ...>
> To: MouthpieceWork@ yahoogroups.  com
> Sent: Saturday, August 2, 2008 10:11:10 AM
> Subject:  [MouthpieceWork] Digital gauges for tip opening
> 
> 
> I  just bought two digital gauges from member David Kulcinski. These 
> are  used, but good working gauges. These are the "Logic Basic 
> Series"  made by CDI Chicago. 
> 
> The gauges can be set for mm's or  inches..
> 
> They fit perfectly in the fixtures I got from Steve  Fowler and my 
> original Winslow tip gauge.
> 
> The neat  thing... with the needle type gauges, I had to count 
> backwards to  determine the tip opening as the probe dropped below the 
> zero (which  was the plane of the mouthpiece table). 
> 
> With these digital  gauges I can place the gauge/fixture on my glass 
> work surface, zero  the gauge. Then place on the mouthpiece and read 
> the tip opening as,  for example, -.098". No counting back, no 
> subtraction, just a direct  reading.
> 
> I'll let David post purchase details. 
> 
> I liked the first one so much I bought a second one.
> 
>  Paul
>



________________________________
 Get  your new Email address! 
Grab the Email name you've always wanted  before someone else does!     


      

Sorry for the delay in answering.  I have a gauge, but I will have to find out what the S&H to Singapore will be.  I will find out tomorrow and let you know.

Thank you,

David



----- Original Message ----
From: christian loh <bakchormee@...>
To: MouthpieceWork@yahoogroups.com
Sent: Tuesday, August 5, 2008 6:01:51 PM
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


Hi David,

I'd like to get one of these gauges.  Shipping to Singapore.

Regards,
Christian



----- Original Message ----
From: David Kulcinski <dkulcinski@yahoo. com>
To: MouthpieceWork@ yahoogroups. com
Sent: Wednesday, 6 August 2008 7:29:16
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


Luis,

I checked with the Post Office and Express Mail is USD $30.50.  First Class Parcel is USD $8.25.  Please let me know how you would like me to ship it.

Thank you,

David



----- Original Message ----
From: luispa8 <luispa8@yahoo. com.ar>
To: MouthpieceWork@ yahoogroups. com
Sent: Sunday, August 3, 2008 11:53:04 AM
Subject: [MouthpieceWork] Re: Digital gauges for tip opening


Hi,

What would be the shipping rate for Argentina? I'd like to buy one of
your gauges.

Best regards,

Luis Pablo

--- In MouthpieceWork@ yahoogroups. com, David Kulcinski
<dkulcinski@ ...> wrote:
>
> There is a 2nd function that reverses the measurement direction. 
This will give all positive indications.
> 
> I have 12 gauges that I would be happy to sell to the first 12
respondents.  They are used, but are in working order.  The cost is
$25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be
determined upon furnishing mailing address information.  They are
warranted for 30 days.  If, for any reason, you are not satisfied,
return gauge postage paid for a full refund minus S&H.
> 
> There is a picture of a typical gauge in the photos section in the
"Digital Gauge" album.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message ----
> From: tenorman1952 <tenorman1952@ ...>
> To: MouthpieceWork@ yahoogroups. com
> Sent: Saturday, August 2, 2008 10:11:10 AM
> Subject: [MouthpieceWork] Digital gauges for tip opening
> 
> 
> I just bought two digital gauges from member David Kulcinski.  These 
> are used, but good working gauges.  These are the "Logic Basic 
> Series" made by CDI Chicago. 
> 
> The gauges can be set for mm's or inches.
> 
> They fit perfectly in the fixtures I got from Steve Fowler and my 
> original Winslow tip gauge.
> 
> The neat thing... with the needle type gauges, I had to count 
> backwards to determine the tip opening as the probe dropped below the 
> zero (which was the plane of the mouthpiece table). 
> 
> With these digital gauges I can place the gauge/fixture on my glass 
> work surface, zero the gauge.  Then place on the mouthpiece and read 
> the tip opening as, for example, -.098".  No counting back, no 
> subtraction, just a direct reading.
> 
> I'll let David post purchase details. 
> 
> I liked the first one so much I bought a second one.
> 
> Paul
>


 
________________________________
 Get your new Email address!  
Grab the Email name you've always wanted before someone else does!     


      

I'd like to have 2 digital gauges.  Please find out S&H for 2 to Singapore.  Thanks!



----- Original Message ----
From: David Kulcinski <dkulcinski@yahoo.com>
To: MouthpieceWork@yahoogroups.com
Sent: Monday, 11 August 2008 3:01:27
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


Sorry for the delay in answering.  I have a gauge, but I will have to find out what the S&H to Singapore will be.  I will find out tomorrow and let you know.

Thank you,

David



----- Original Message ----
From: christian loh <bakchormee@...>
To: MouthpieceWork@yahoogroups.com
Sent: Tuesday, August 5, 2008 6:01:51 PM
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


Hi David,

I'd like to get one of these gauges.  Shipping to Singapore.

Regards,
Christian



----- Original Message ----
From: David Kulcinski <dkulcinski@yahoo. com>
To: MouthpieceWork@ yahoogroups. com
Sent: Wednesday, 6 August 2008 7:29:16
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


Luis,

I checked with the Post Office and Express Mail is USD $30.50.  First Class Parcel is USD $8.25.  Please let me know how you would like me to ship it.

Thank you,

David



----- Original Message ----
From: luispa8 <luispa8@yahoo. com.ar>
To: MouthpieceWork@ yahoogroups. com
Sent: Sunday, August 3, 2008 11:53:04 AM
Subject: [MouthpieceWork] Re: Digital gauges for tip opening


Hi,

What would be the shipping rate for Argentina? I'd like to buy one of
your gauges.

Best regards,

Luis Pablo

--- In MouthpieceWork@ yahoogroups. com, David Kulcinski
<dkulcinski@ ...> wrote:
>
> There is a 2nd function that reverses the measurement direction. 
This will give all positive indications.
> 
> I have 12 gauges that I would be happy to sell to the first 12
respondents.  They are used, but are in working order.  The cost is
$25.00 + $5.00 S&H  + insurance to the USA.  Overseas postage will be
determined upon furnishing mailing address information.  They are
warranted for 30 days.  If, for any reason, you are not satisfied,
return gauge postage paid for a full refund minus S&H.
> 
> There is a picture of a typical gauge in the photos section in the
"Digital Gauge" album.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message ----
> From: tenorman1952 <tenorman1952@ ...>
> To: MouthpieceWork@ yahoogroups. com
> Sent: Saturday, August 2, 2008 10:11:10 AM
> Subject: [MouthpieceWork] Digital gauges for tip opening
> 
> 
> I just bought two digital gauges from member David Kulcinski.  These 
> are used, but good working gauges.  These are the "Logic Basic 
> Series" made by CDI Chicago. 
> 
> The gauges can be set for mm's or inches.
> 
> They fit perfectly in the fixtures I got from Steve Fowler and my 
> original Winslow tip gauge.
> 
> The neat thing... with the needle type gauges, I had to count 
> backwards to determine the tip opening as the probe dropped below the 
> zero (which was the plane of the mouthpiece table). 
> 
> With these digital gauges I can place the gauge/fixture on my glass 
> work surface, zero the gauge.  Then place on the mouthpiece and read 
> the tip opening as, for example, -.098".  No counting back, no 
> subtraction, just a direct reading.
> 
> I'll let David post purchase details. 
> 
> I liked the first one so much I bought a second one.
> 
> Paul
>


 
________________________________
 Get your new Email address!  
Grab the Email name you've always wanted before someone else does! 
 


      New Email addresses available on Yahoo!
Get the Email name you've always wanted on the new @ymail and @rocketmail. 
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/sg/

are you still inte3rested in getting a gauge?  If so, deposit $25.00 $5.00 S&H to dkulcinski@... through PayPal and I will get a gauge out to you.

Thank you,

David



----- Original Message ----
From: "kweinstein1@sbcglobal.net" <kweinstein1@...>
To: MouthpieceWork@yahoogroups.com
Sent: Tuesday, August 5, 2008 8:42:00 PM
Subject: Re: [MouthpieceWork] Re: Digital gauges for tip opening


 
I will take one, too. Thanks. mark
 
Mark & Kerry Weinstein, Proprietors
WEINSTEIN 
WOODWINDS
6422B North Santa Fe Avenue
Oklahoma City, OK  
USA

----- Original Message ----- 
From: christian  loh 
To: MouthpieceWork@ yahoogroups. com 
Sent: Tuesday, August 05, 2008 8:01  PM
Subject: Re: [MouthpieceWork] Re: Digital  gauges for tip opening

Hi David,

I'd like to get one of these gauges.  Shipping to  Singapore.

Regards,
Christian



-----  Original Message ----
From: David Kulcinski <dkulcinski@yahoo. com>
To: MouthpieceWork@ yahoogroups. com
Sent:  Wednesday, 6 August 2008 7:29:16
Subject: Re: [MouthpieceWork] Re: Digital  gauges for tip opening


Luis,

I checked with the Post Office and Express Mail is USD  $30.50.  First Class Parcel is USD $8.25.  Please let me know how  you would like me to ship it.

Thank you,

David



-----  Original Message ----
From: luispa8  <luispa8@yahoo. com.ar>
To:  MouthpieceWork@ yahoogroups. com
Sent: Sunday, August 3, 2008  11:53:04 AM
Subject: [MouthpieceWork] Re: Digital gauges for tip  opening


Hi,

What would be the shipping rate for Argentina? I'd like to buy  one of
your gauges.

Best regards,

Luis Pablo

--- In MouthpieceWork@ yahoogroups.  com, David Kulcinski
<dkulcinski@ ...> wrote:
>
>  There is a 2nd function that reverses the measurement direction. 
This will  give all positive indications.
> 
> I have 12 gauges that I would  be happy to sell to the first 12
respondents. They are used, but are in  working order. The cost is
$25.00 + $5.00 S&H + insurance to the USA.  Overseas postage will be
determined upon furnishing mailing address  information. They are
warranted for 30 days. If, for any reason, you are  not satisfied,
return gauge postage paid for a full refund minus  S&H.
> 
> There is a picture of a typical gauge in the photos  section in the
"Digital Gauge" album.
> 
> Thank you,
> 
> David
> 
> 
> 
> ----- Original Message  ----
> From: tenorman1952 <tenorman1952@ ...>
> To: MouthpieceWork@ yahoogroups.  com
> Sent: Saturday, August 2, 2008 10:11:10 AM
> Subject:  [MouthpieceWork] Digital gauges for tip opening
> 
> 
> I  just bought two digital gauges from member David Kulcinski. These 
> are  used, but good working gauges. These are the "Logic Basic 
> Series"  made by CDI Chicago. 
> 
> The gauges can be set for mm's or  inches.
> 
> They fit perfectly in the fixtures I got from Steve  Fowler and my 
> original Winslow tip gauge.
> 
> The neat  thing... with the needle type gauges, I had to count 
> backwards to  determine the tip opening as the probe dropped below the 
> zero (which  was the plane of the mouthpiece table). 
> 
> With these digital  gauges I can place the gauge/fixture on my glass 
> work surface, zero  the gauge. Then place on the mouthpiece and read 
> the tip opening as,  for example, -.098". No counting back, no 
> subtraction, just a direct  reading.
> 
> I'll let David post purchase details. 
> 
> I liked the first one so much I bought a second one.
> 
>  Paul
>



________________________________
 Get  your new Email address! 
Grab the Email name you've always wanted  before someone else does!