Mouthpiece Work / Topic Outline for Mouthpiece Refacing Video
FROM: saxgourmet (STEVE GOODSON)
SUBJECT: Topic Outline for Mouthpiece Refacing Video
Here's a rough outline.....any omissions?......comments?....we hope to
start shooting next week
DESIGN PRINCIPLES
Chamber Size
Baffle Shape
Height
Rollover
Straight
cliff
Side Rail Width
Tip Rail Width
Facing Curves
Short vs. long playing characteristics
elliptical vs. non-elliptical
TOOLS
Measuring
Glass Gauge
Tip Opening Gauge
Dial
Digital
Manual
Feeler Gauges
Modification Tools
Leveling surface
Glass Plate
Granite Block
Emery Paper
Files
Polishing Compounds
Motor Tools
Epoxy Putty
Bite Plate Material Choices
MEASURING TECHNIQUES
Flatness of the table
Glass Gauge and feelers
Tip Measuring
CORRECTING FLAWS
Flattening the table
balancing the curve
Evening the tip rail
Shaping the tip
MODIFICATION
Increasing the tip opening
cutting the tip itself
changing the table angle
Changing the curve
using files
using emery paper
Narrowing the side rails
Narrowing the tip rail
Installing an epoxy baffle
CLEANING AND MAINTENANCE
Polishing
metal
hard rubber
plastic
Gilding trademarks
replacing bite plates
<http://www.nationofmusic.com/ecommerce/>
PLEASE VISIT MY WEB SITES
http://www.orpheusmusic.com <http://www.orpheusmusic.com/>
http://stevegoodsonsaxophones.com <http://stevegoodsonsaxophones.com/>
http://www.nationofmusic.com <http://www.nationofmusic.com/>
http://www.saxnation.com/forum/
http://launch.groups.yahoo.com/group/SaxophoneRepair/
http://www.saxgourmet.com <http://www.saxgourmet.com/>
http://www.cafepres <http://www.cafepress.com/saxgourmet> s.com/saxgourmet
<http://saxophonethoughts.blogspot.com/>
http://saxophonethoughts.blogspot.com/
http://www.MySpace.com/saxgourmet
<http://youtube.com/results?search_query=saxgourmetsteve&search_type>
http://youtube.com/results?search_query=saxgourmetsteve&search_type
The Music Business is a cruel and shallow money trench, a long plastic
hallway where thieves and pimps run free and good men die like dogs.
There's also a negative side." Hunter S. Thompson
Steve Goodson
see our TERMS OF SERVICE at:
http://saxgourmet.com/business.html
Confidentiality Statement "The information contained in this electronic
message is privileged and confidential information intended only for the use
of the owner of the email address listed as the recipient of this message.
If you are not the intended recipient, or the employee or agent responsible
for delivering this message to the intended recipient, you are hereby
notified that any disclosure, dissemination, distribution, forwarding, or
copying of this communication is strictly prohibited."
FROM: tenorman1952 (Paul C.)
SUBJECT: Re: Topic Outline for Mouthpiece Refacing Video
Banding shanks.
Paul
STEVE GOODSON <saxgourmet@...> wrote:
Here's a rough outline.....any omissions?......comments?....we hope to start shooting next week
DESIGN PRINCIPLES
Chamber Size
Baffle Shape
Height
Rollover
Straight
cliff
Side Rail Width
Tip Rail Width
Facing Curves
Short vs. long playing characteristics
elliptical vs. non-elliptical
TOOLS
Measuring
Glass Gauge
Tip Opening Gauge
Dial
Digital
Manual
Feeler Gauges
Modification Tools
Leveling surface
Glass Plate
Granite Block
Emery Paper
Files
Polishing Compounds
Motor Tools
Epoxy Putty
Bite Plate Material Choices
MEASURING TECHNIQUES
Flatness of the table
Glass Gauge and feelers
Tip Measuring
CORRECTING FLAWS
Flattening the table
balancing the curve
Evening the tip rail
Shaping the tip
MODIFICATION
Increasing the tip opening
cutting the tip itself
changing the table angle
Changing the curve
using files
using emery paper
Narrowing the side rails
Narrowing the tip rail
Installing an epoxy baffle
CLEANING AND MAINTENANCE
Polishing
metal
hard rubber
plastic
Gilding trademarks
replacing bite plates
PLEASE VISIT MY WEB SITES
http://www.orpheusmusic.com
http://stevegoodsonsaxophones.com
http://www.nationofmusic.com
http://www.saxnation.com/forum/
http://launch.groups.yahoo.com/group/SaxophoneRepair/
http://www.saxgourmet.com
http://www.cafepress.com/saxgourmet
http://saxophonethoughts.blogspot.com/
http://www.MySpace.com/saxgourmet
http://youtube.com/results?search_query=saxgourmetsteve&search_type The Music Business is a cruel and shallow money trench, a long plastic hallway where thieves and pimps run free and good men die like dogs. There's also a negative side." Hunter S. Thompson
Steve Goodson
see our TERMS OF SERVICE at:
http://saxgourmet.com/business.html
Confidentiality Statement "The information contained in this electronic message is privileged and confidential information intended only for the use of the owner of the email address listed as the recipient of this message. If you are not the intended recipient, or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any disclosure, dissemination, distribution, forwarding, or copying of this communication is strictly prohibited."
Link to Paul's articles from Main page of "Saxgourmet":
http://www.saxgourmet.com
Listen to Paul's MP3's and view saxophone photos at:
http://briefcase.yahoo.com/tenorman1952
Paul Coats is the sole US importer of SAXRAX products from
http://www.saxrax.com
For SAXRAX products, email Paul at saxraxus@...
FROM: perksjim (Jim West)
SUBJECT: Re: Topic Outline for Mouthpiece Refacing Video
Chamber SHAPE
Baffle shape is the most important part of the complete chamber shape.
But also of interest:
1. General air flow considerations:
A. Side wall shaping, straight or curved.
B. Ramp shaping.
2. Horn specific considerations (assuming horn is known):
A. Smooth transition to the neck.
B. Tuning (missing conic truncation volume).
----- Original Message -----
From: STEVE GOODSON
To: STEVE GOODSON
Sent: Monday, May 26, 2008 1:11 PM
Subject: [MouthpieceWork] Topic Outline for Mouthpiece Refacing Video
Here's a rough outline.....any omissions?......comments?....we hope to start shooting next week
DESIGN PRINCIPLES
Chamber Size
Baffle Shape
Height
Rollover
Straight
cliff
Side Rail Width
Tip Rail Width
Facing Curves
Short vs. long playing characteristics
elliptical vs. non-elliptical
TOOLS
Measuring
Glass Gauge
Tip Opening Gauge
Dial
Digital
Manual
Feeler Gauges
Modification Tools
Leveling surface
Glass Plate
Granite Block
Emery Paper
Files
Polishing Compounds
Motor Tools
Epoxy Putty
Bite Plate Material Choices
MEASURING TECHNIQUES
Flatness of the table
Glass Gauge and feelers
Tip Measuring
CORRECTING FLAWS
Flattening the table
balancing the curve
Evening the tip rail
Shaping the tip
MODIFICATION
Increasing the tip opening
cutting the tip itself
changing the table angle
Changing the curve
using files
using emery paper
Narrowing the side rails
Narrowing the tip rail
Installing an epoxy baffle
CLEANING AND MAINTENANCE
Polishing
metal
hard rubber
plastic
Gilding trademarks
replacing bite plates
PLEASE VISIT MY WEB SITES
http://www.orpheusmusic.com
http://stevegoodsonsaxophones.com
http://www.nationofmusic.com
http://www.saxnation.com/forum/
http://launch.groups.yahoo.com/group/SaxophoneRepair/
http://www.saxgourmet.com
http://www.cafepress.com/saxgourmet
http://saxophonethoughts.blogspot.com/
http://www.MySpace.com/saxgourmet
http://youtube.com/results?search_query=saxgourmetsteve&search_type
The Music Business is a cruel and shallow money trench, a long plastic hallway where thieves and pimps run free and good men die like dogs. There's also a negative side." Hunter S. Thompson
Steve Goodson
see our TERMS OF SERVICE at:
http://saxgourmet.com/business.html
Confidentiality Statement "The information contained in this electronic message is privileged and confidential information intended only for the use of the owner of the email address listed as the recipient of this message. If you are not the intended recipient, or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any disclosure, dissemination, distribution, forwarding, or copying of this communication is strictly prohibited."
------------------------------------------------------------------------------
Internal Virus Database is out-of-date.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.20 - Release Date: 5/17/2008 12:00 AM