FROM: bluesnote2000 (bluesnote2000)
SUBJECT: Strathon Adjustone Tenor Mouthpieces
Hi:
2
 Questions.  Does anybody have a series of mesurements for an 8 or 7*


  How do you tell the old Strathons from the new ones 
Thanks,

BK



FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: Strathon Adjustone Tenor Mouthpieces
I have a newer 7* around I could measure up.  I played on it for a year. 
It was a lot of fun.

The main old/new difference I've noticed was that it looks like less hard
rubber is in the newer ones.  They look more like polished plastic.  The
old ones like purer hard rubber.  The fit of the sliding baffle was a
little sloppy and off-centered in my newer one.  I doubt they are all like
that.  Some report differences in the mechanism or leaks, but I have not
seen either.  I've only seen a few though.


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

FROM: libri_777 (Gerhard H Wrodnigg)
SUBJECT: Re: Strathon Adjustone Tenor Mouthpieces
Hello!

>  Questions.� Does anybody have a series of mesurements for an 8 or 7*
 
I just have measurements for a 6:

MPC     Zinner          Strathon
Size    6               
Tip     0.082
mm      Bahn            
        left    right
0.04    58      56
0.15    46      44
0.25    41      39.5
0.45    33      32
0.65    37.5    36.5
0.90    22      21.5
1.20    15      14.5
1.60    15.5    15.5
2.00    4       5
2.50    4       4

regards, ~ghw

  


FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: Strathon Adjustone Tenor Mouthpieces
Here are the measurements from my 7*.  Its a little flatter than a radial
facing.  The tip is a little twisted too.

0.0017	44.20	44.20
0.005	40.00	40.00
0.010	35.80	35.80
0.016	31.70	31.70
0.026	26.30	26.30
0.035	22.00	22.00
0.050	16.00	15.90
0.063	11.20	10.90
0.078	6.20	5.90
0.093	2.00	1.80		
		
	Tip Opening	0.0930
	Tip Rail Width	0.0500




		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 
 

FROM: bluesnote2000 (dan lunsford)
SUBJECT: Re: Strathon Adjustone Tenor Mouthpieces

--- Keith Bradbury <kwbradbury@...> wrote:

> Here are the measurements from my 7*.  Its a little
> flatter than a radial
> facing.  The tip is a little twisted too.
> 
> 0.0017	44.20	44.20
> 0.005	40.00	40.00
> 0.010	35.80	35.80
> 0.016	31.70	31.70
> 0.026	26.30	26.30
> 0.035	22.00	22.00
> 0.050	16.00	15.90
> 0.063	11.20	10.90
> 0.078	6.20	5.90
> 0.093	2.00	1.80		
> 		
> 	Tip Opening	0.0930
> 	Tip Rail Width	0.0500
> 
> 
> 
> 
> 		
> ____________________________________________________
> Start your day with Yahoo! - make it your home page 
> http://www.yahoo.com/r/hs 
>  
> Hi:
Thanks for the info.  The one I got (7*), comes in at
a .95, with a longer break, (47).

BK



		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 
 

FROM: bluesnote2000 (dan lunsford)
SUBJECT: Re: Strathon Adjustone Tenor Mouthpieces

--- Gerhard H Wrodnigg <yahoogroups@...>
wrote:

> Hello!
> 
> >  Questions.� Does anybody have a series of
> mesurements for an 8 or 7*
>  
> I just have measurements for a 6:
> 
> MPC     Zinner          Strathon
> Size    6               
> Tip     0.082
> mm      Bahn            
>         left    right
> 0.04    58      56
> 0.15    46      44
> 0.25    41      39.5
> 0.45    33      32
> 0.65    37.5    36.5
> 0.90    22      21.5
> 1.20    15      14.5
> 1.60    15.5    15.5
> 2.00    4       5
> 2.50    4       4
> 
> regards, ~ghw
> 
>   
> 
> Thanks for the info.

BK



		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs