He forgives if I have left you with you doubt but I need´s of 
information on mouthpiece but do not know to express myself.  to 
summarize mine cad doubts one of  would have a project or a drawing of 
the creation of mouthpiece an example as: 

All Albums  | Photo Albums > CAD > 

JR_proto_drg  
 

There are many pictures of mouthpieces being refaced on the Mouthpiece 
Work website.  Also, Patrick Springer had some pictures on his website 
of mouthpiece tables being flattened.  I don't remember where they were 
located, but:

http://www.springermpc.com/

There is a lot of information about refacing in the archives (the old 
messages) on the Mouthpiece Work site as well, but it is all in 
English.  Maybe the pictures would be more helpful.

Dan

ccnobrasil wrote:

>He forgives if I have left you with you doubt but I need�s of 
>information on mouthpiece but do not know to express myself.  to 
>summarize mine cad doubts one of  would have a project or a drawing of 
>the creation of mouthpiece an example as: 
>
>All Albums  | Photo Albums > CAD > 
>
>JR_proto_drg  
> 
>
>
>
>
>Got a Mouthpiece Work question?  Send it to MouthpieceWork@yahoogroups.com
>
>Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
>
>To see and modify your groups, go to http://groups.yahoo.com/mygroups 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>
>
>  
>

We do not have any CAD drawings posted that would assist you in making 
a mouthpiece.  Some of them members may have some, but I doubt it.

There are many mouthpiece designs, so starting with someone else's CAD 
design seems strange to me.  A more normal approach would be to get a 
mouthpiece you like and try to copy it.  You should create your own 
drawings of this mouthpiece if you need them.  Or take it to a designer 
or shop that can do this for you.

Have you ever casted a mouthpiece to copy it?

>From: "Keith Bradbury" <kwbradbury@...>
>Reply-To: MouthpieceWork@yahoogroups.com
>To: MouthpieceWork@yahoogroups.com
>Subject: [MouthpieceWork] Re: Brazil information
>Date: Tue, 28 Jun 2005 16:51:29 -0000
>
>We do not have any CAD drawings posted that would assist you in making
>a mouthpiece.  Some of them members may have some, but I doubt it.
>
>There are many mouthpiece designs, so starting with someone else's CAD
>design seems strange to me.  A more normal approach would be to get a
>mouthpiece you like and try to copy it.  You should create your own
>drawings of this mouthpiece if you need them.  Or take it to a designer
>or shop that can do this for you.
>
>

--- In MouthpieceWork@yahoogroups.com, "joe gatlin" <gatlin88@h...> 
wrote:
> Have you ever casted a mouthpiece to copy it?

I have not.  Micro-Mark sells supplies for this.  Shrinkage is a small 
issue from what I've read.

do you know of anybody that does it besides bob ackerman

>From: "Keith Bradbury" <kwbradbury@...>
>Reply-To: MouthpieceWork@yahoogroups.com
>To: MouthpieceWork@yahoogroups.com
>Subject: [MouthpieceWork] Casting to copy
>Date: Tue, 28 Jun 2005 22:47:26 -0000
>
>--- In MouthpieceWork@yahoogroups.com, "joe gatlin" <gatlin88@h...>
>wrote:
> > Have you ever casted a mouthpiece to copy it?
>
>I have not.  Micro-Mark sells supplies for this.  Shrinkage is a small
>issue from what I've read.
>
>
>

>do you know of anybody that does it besides bob ackerman

Ed Pillinger in the UK.  Check his site in the Links.



		
__________________________________ 
Yahoo! Mail Mobile 
Take Yahoo! Mail with you! Check email on your mobile phone. 
http://mobile.yahoo.com/learn/mail