Paul, As was suggested I did measure the facing and found it to be short. I sold the piece which was untouched instead of taking a chance on not correcting the problem and having lowered the value of the piece by having it altered. I'm new at this art. Thanks, Doug... 
  ----- Original Message ----- 
  From: Paul Coats 
  To: MouthpieceWork@yahoogroups.com 
  Sent: Saturday, February 05, 2005 11:54 PM
  Subject: Re: [MouthpieceWork]


  Is this a "*" facing?  (4*, 5*, etc).  The * facings are very short and difficult in the low register.  Lengthen the facing and they are quite nice.

  Paul

  douglas neale wrote:

    I have a tenor Brilhart Tonalin that has a decent sound but the low C# and down are difficult to get out. It's not the horn. Any suggestions other than Ebay? Thanks..


    Got a Mouthpiece Work question?  Send it to MouthpieceWork@yahoogroups.com

    Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.

    To see and modify your groups, go to http://groups.yahoo.com/mygroups 




  Got a Mouthpiece Work question?  Send it to MouthpieceWork@yahoogroups.com

  Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.

  To see and modify your groups, go to http://groups.yahoo.com/mygroups 



------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/MouthpieceWork/
      
    b.. To unsubscribe from this group, send an email to:
    MouthpieceWork-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.