Mouthpiece Work / Otto Link HR Tenor schedule
FROM: mdc5220 (mdc5220)
SUBJECT: Otto Link HR Tenor schedule
Any thoughts on this schedule for an HR Otto Link? Would this work on a STM? .0015 - 46 .010 - 36 .024 - 26 .034 - 20 .050 - 14 tip 220 mm Thanks
FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: Otto Link HR Tenor schedule
For closer to a radial curve: > > .0015 - 46 OK > .010 - 36 Aim for 35.5 > .024 - 26 OK > .034 - 20 Aim for 20.75 > .050 - 14 OK > tip 220 mm Actually 2.20 mm = .087" >
FROM: mdc5220 (michael d. collins)
SUBJECT: Re: Otto Link HR Tenor schedule
thanks Keith.
----- Original Message -----
From: Keith Bradbury
To: MouthpieceWork@yahoogroups.com
Sent: Thursday, January 27, 2005 12:20 PM
Subject: [MouthpieceWork] Re: Otto Link HR Tenor schedule
For closer to a radial curve:
>
> .0015 - 46 OK
> .010 - 36 Aim for 35.5
> .024 - 26 OK
> .034 - 20 Aim for 20.75
> .050 - 14 OK
> tip 220 mm Actually 2.20 mm = .087"
>
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
b.. To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FROM: egfurre (EgilF.)
SUBJECT: Re: Otto Link HR Tenor schedule
--- reading old posts... does this make a big difference? (35.5 instead of 36 on .010 and 20.75 instead of 20 on .034) EgilF. --- In MouthpieceWork@yahoogroups.com, "michael d. collins" <chedoggy@...> wrote: > > thanks Keith. > ----- Original Message ----- > From: Keith Bradbury > To: MouthpieceWork@yahoogroups.com > Sent: Thursday, January 27, 2005 12:20 PM > Subject: [MouthpieceWork] Re: Otto Link HR Tenor schedule > > > > For closer to a radial curve: > > > > > .0015 - 46 OK > > .010 - 36 Aim for 35.5 > > .024 - 26 OK > > .034 - 20 Aim for 20.75 > > .050 - 14 OK > > > tip 220 mm Actually 2.20 mm = .087" > > > > > > > > > > Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com > > Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work. > > To see and modify your groups, go to http://groups.yahoo.com/mygroups > > > > ------------------------------------------------------------------------------ > Yahoo! Groups Links > > a.. To visit your group on the web, go to: > http://groups.yahoo.com/group/MouthpieceWork/ > > b.. To unsubscribe from this group, send an email to: > MouthpieceWork-unsubscribe@yahoogroups.com > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. >
FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: Otto Link HR Tenor schedule
Some say yes, some say no. I think it may have to do with your embouchure and
reed choice. If you are only going to use a set of 5 feeler gages, there are
probably going to be other differences of this magnitude that are missed with
this system.
________________________________
From: EgilF. <egfurre@...>
To: MouthpieceWork@yahoogroups.com
Sent: Sat, January 15, 2011 9:18:22 PM
Subject: [MouthpieceWork] Re: Otto Link HR Tenor schedule
--- reading old posts...
does this make a big difference? (35.5 instead of 36 on .010 and 20.75 instead
of 20 on .034)
EgilF.
--- In MouthpieceWork@yahoogroups.com, "michael d. collins" <chedoggy@...>
wrote:
>
> thanks Keith.
> ----- Original Message -----
> From: Keith Bradbury
> To: MouthpieceWork@yahoogroups.com
> Sent: Thursday, January 27, 2005 12:20 PM
> Subject: [MouthpieceWork] Re: Otto Link HR Tenor schedule
>
>
>
> For closer to a radial curve:
>
> >
> > .0015 - 46 OK
> > .010 - 36 Aim for 35.5
> > .024 - 26 OK
> > .034 - 20 Aim for 20.75
> > .050 - 14 OK
>
> > tip 220 mm Actually 2.20 mm = .087"
> >
>
.
FROM: frymorgan (Morgan)
SUBJECT: Re: Otto Link HR Tenor schedule
No, this makes a small difference. What difference in sound and response it makes will be noticed by some players, not by others, and which of these curves is preferable is largely a matter of taste. --- In MouthpieceWork@yahoogroups.com, "EgilF." <egfurre@...> wrote: > > --- reading old posts... > does this make a big difference? (35.5 instead of 36 on .010 and 20.75 instead of 20 on .034) > > EgilF. > > > > --- In MouthpieceWork@yahoogroups.com, "michael d. collins" <chedoggy@> wrote: > > > > thanks Keith. > > ----- Original Message ----- > > From: Keith Bradbury > > To: MouthpieceWork@yahoogroups.com > > Sent: Thursday, January 27, 2005 12:20 PM > > Subject: [MouthpieceWork] Re: Otto Link HR Tenor schedule > > > > > > > > For closer to a radial curve: > > > > > > > > .0015 - 46 OK > > > .010 - 36 Aim for 35.5 > > > .024 - 26 OK > > > .034 - 20 Aim for 20.75 > > > .050 - 14 OK > > > > > tip 220 mm Actually 2.20 mm = .087" > > > > > > > > > > > > > > > > > > > Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com > > > > Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work. > > > > To see and modify your groups, go to http://groups.yahoo.com/mygroups > > > > > > > > ------------------------------------------------------------------------------ > > Yahoo! Groups Links > > > > a.. To visit your group on the web, go to: > > http://groups.yahoo.com/group/MouthpieceWork/ > > > > b.. To unsubscribe from this group, send an email to: > > MouthpieceWork-unsubscribe@yahoogroups.com > > > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > >