Mouthpiece Work / Tip Gauges
FROM: jazzplayer88 (Keith Ley)
SUBJECT: Tip Gauges
Thanks Keith, I also found out that Babbitt sells tip gauges as well as glass gauges. One for sax mouthpieces and one for clarinet so I think I'm just going to order all the stuff from them which will save me $100 over the price of the Morgan or Winslow kits. Keith Ley _________________________________________________________________ FREE pop-up blocking with the new MSN Toolbar � get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
FROM: saxgourmet (STEVE GOODSON)
SUBJECT: Re: Tip Gauges
The tip opening gauge that Babbit sells is pretty basic: it's not super precise, and only goes to .120. It is cheap and easy to use, probably just fine for most hobbyists. -----Original Message----- From: Keith Ley [mailto:keith_ley@...] Sent: Friday, May 28, 2004 10:31 AM To: MouthpieceWork@yahoogroups.com Subject: [MouthpieceWork] Tip Gauges Thanks Keith, I also found out that Babbitt sells tip gauges as well as glass gauges. One for sax mouthpieces and one for clarinet so I think I'm just going to order all the stuff from them which will save me $100 over the price of the Morgan or Winslow kits. Keith Ley _________________________________________________________________ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ Got a Mouthpiece Work question? Send it to MouthpieceWork@...m Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work. To see and modify your groups, go to http://groups.yahoo.com/mygroups Yahoo! Groups Links
FROM: sjrosner (Jeff Rosner)
SUBJECT: Re: Tip Gauges
I have a Babbitt tip gauge and a number of depth gauges...the Babbitt gauge (at least the one that I have) is surprisingly accurate, but requires more thought to get a good reproducible measurement. You need to make certain that you are reading it at the right place. Generally (for a typical tip cut) the gage contacts the tip rail at the 'inside' (i.e. towards the chamber) edge of the tip rail. You therefore have to read the gage at this point, NOT at the tip...many folks make this mistake. The depth gage always picks the highest point of the tip rail. I have found pretty good agreement between my depth gauges and the wand when I am careful...has a consistent offset of ~0.0015. The wand is much faster to use. --- In MouthpieceWork@yahoogroups.com, "Keith Ley" <keith_ley@h...> wrote: > > Thanks Keith, > I also found out that Babbitt sells tip gauges as well as glass gauges. One > for sax mouthpieces and one for clarinet so I think I'm just going to order > all the stuff from them which will save me $100 over the price of the Morgan > or Winslow kits. > > Keith Ley > > _________________________________________________________________ > FREE pop-up blocking with the new MSN Toolbar get it now! > http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: Tip Gauges
Jeff, how much error would there be in a tip reading on a wand if it was read at the very tip instead of inside the tip rail? Tip rail thickness varies from ~.020" to .060" or more. __________________________________ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/
FROM: sjrosner (Jeff Rosner)
SUBJECT: Re: Tip Gauges
It depends on the taper of the wand. My Babbitt wand tapers about .001 for each .023 of length. So for an .023 tip rail, the error is .001, for an .069, it is .003. Probably not to worry about, but enough to require awareness and consistency. jeff --- In MouthpieceWork@yahoogroups.com, Keith Bradbury <kwbradbury@y...> wrote: > Jeff, how much error would there be in a tip reading on a wand if it was > read at the very tip instead of inside the tip rail? Tip rail thickness > varies from ~.020" to .060" or more. > > > > > __________________________________ > Do you Yahoo!? > Friends. Fun. Try the all-new Yahoo! Messenger. > http://messenger.yahoo.com/
FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: Tip Gauges
I agree. Not huge, but worth considering. Not enough to explain why many mouthpieces are .005-.010 smaller than "the charts" list or as they are marked, like Bergs. __________________________________ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/
FROM: sjrosner (Jeff Rosner)
SUBJECT: Re: Tip Gauges
I have a theory that has held up to date on these. The tip rail is always angled with respect to the table. Most of us (I think) call the tip opening the distance from the plane of table to the closest point on the tip rail...this is because that is what we measure with a wand or a depth gauge. If you measure with a caliper right at the tip, however, you always get a larger number. I added a diagram to the <Gauging> photo directory to indicate what I am blathering about... jeff --- In MouthpieceWork@yahoogroups.com, Keith Bradbury <kwbradbury@y...> wrote: > I agree. Not huge, but worth considering. > > Not enough to explain why many mouthpieces are .005-.010 smaller than "the > charts" list or as they are marked, like Bergs. > > > > > __________________________________ > Do you Yahoo!? > Friends. Fun. Try the all-new Yahoo! Messenger. > http://messenger.yahoo.com/
FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: Tip Gauges
I thought about this a lot. I think Paul may measure to the tip. Some Vandoren specs I analyzed seemed to make more sense if you assume the tip was measured at the very tip AND the facing length was where the curve meets the table (a theoretical .0000" feeler). I'm sure there are a few manufacturers and refacers that do things differently. __________________________________ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/
FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: Tip Gauges
I just looked at your sketch. I think calipers tend to measure the inside of the tip rail too. They do with the technique I used.
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Tip Gauges
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator.
Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: cinjolo (Joseph Lopez MD)
SUBJECT: Re: Tip Gauges
Sign me up for two, please.
Joe Lopez
----- Original Message -----
From: Steve Fowler
To: MouthpieceWork@yahoogroups.com
Sent: Wednesday, January 12, 2005 10:11 AM
Subject: [MouthpieceWork] Tip Gauges
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
b.. To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FROM: kwbradbury (Keith Bradbury)
SUBJECT: Fowler Dial Tip Gauge
I'd grab one at that price. __________________________________ Do you Yahoo!? All your favorites on one personal page � Try My Yahoo! http://my.yahoo.com
FROM: danielmarsteller (dandjmars@...)
SUBJECT: Re: Tip Gauges
Steve - Count on me for two. Dan Marsteller
FROM: mvprod7991 (mvprod7991)
SUBJECT: Re: Tip Gauges
I will buy that too. Please add me to the list. Mike Vaccaro mvprod@... --- In MouthpieceWork@yahoogroups.com, "Steve Fowler" <steve@f...> wrote: > I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. > Would there be any interest if I can keep the price around $25.00 each? > > Steve > > =================== > > Steve Fowler > > Fowler Music Service > -------- Custom Band Instrument Repairs -------- > ------ Plating in Silver and Gold ------ > > 602 Kent Avenue > Pasadena, MD 21122 > 410-647-9537 > > www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: mvprod7991 (mvprod7991)
SUBJECT: Re: Tip Gauges
On second thought make that 2 for me Mike Vaccaro mvprod@... --- In MouthpieceWork@yahoogroups.com, "mvprod7991" <MVPROD@a...> wrote: > > I will buy that too. Please add me to the list. > > Mike Vaccaro > mvprod@a... > > > > --- In MouthpieceWork@yahoogroups.com, "Steve Fowler" <steve@f...> > wrote: > > I'm thinking of making up some tip gauges using a 2 1/4" dial > indicator. > > Would there be any interest if I can keep the price around $25.00 > each? > > > > Steve > > > > =================== > > > > Steve Fowler > > > > Fowler Music Service > > -------- Custom Band Instrument Repairs -------- > > ------ Plating in Silver and Gold ------ > > > > 602 Kent Avenue > > Pasadena, MD 21122 > > 410-647-9537 > > > > www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: merlin_williams_toronto (merlin_williams_toronto)
SUBJECT: Re: Tip Gauges
Count me in as well! --- In MouthpieceWork@yahoogroups.com, "Steve Fowler" <steve@f...> wrote: > I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. > Would there be any interest if I can keep the price around $25.00 each? > > Steve > > =================== > > Steve Fowler > > Fowler Music Service > -------- Custom Band Instrument Repairs -------- > ------ Plating in Silver and Gold ------ > > 602 Kent Avenue > Pasadena, MD 21122 > 410-647-9537 > > www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: r1l2h32000 (ralph hopper)
SUBJECT: Re: Tip Gauges
Steve, I'd be interested in one but could you provide a bit more info about how these would be done and what they would be like?
Thanks
Ralph
www.ralphhopper.ca
Steve Fowler <steve@...> wrote:
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FROM: saxgourmet (STEVE GOODSON)
SUBJECT: Re: Tip Gauges
Deal me in for one!
"There's only 12 notes. It's all in how you use them!" Tim Price
Visit my website and online store <http://www.saxgourmet.com/>
www.saxgourmet.com
Visit my Saxophone Discussion Forum http://saxgourmet.myforums.net/
Visit the Sax Repair Discussion Group
http://launch.groups.yahoo.com/group/SaxophoneRepair/
Steve Goodson
see our TERMS OF SERVICE at:
http://saxgourmet.com/business.html
-----Original Message-----
From: Steve Fowler [mailto:steve@...]
Sent: Wednesday, January 12, 2005 10:11 AM
To: MouthpieceWork@yahoogroups.com
Subject: [MouthpieceWork] Tip Gauges
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator.
Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the
Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
* To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
<mailto:MouthpieceWork-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
FROM: mdc5220 (michael d. collins)
SUBJECT: Re: Tip Gauges
Yes, count me in for at least one.
----- Original Message -----
From: Steve Fowler
To: MouthpieceWork@yahoogroups.com
Sent: Wednesday, January 12, 2005 11:11 AM
Subject: [MouthpieceWork] Tip Gauges
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
b.. To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FROM: tenorman1952 (Paul Coats)
SUBJECT: Re: Tip Gauges
Steve, put me down for one, too. Paul Coats Steve Fowler wrote: > I'm thinking of making up some tip gauges using a 2 1/4" dial > indicator. Would there be any interest if I can keep the price around > $25.00 each? > > Steve > > =================== > > Steve Fowler > > Fowler Music Service > -------- Custom Band Instrument Repairs -------- > ------ Plating in Silver and Gold ------ > > 602 Kent Avenue > Pasadena, MD 21122 > 410-647-9537 > > www.fowlermusic.com <http://www.fowlermusic.com/> > > > > > Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com > > Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see > the Files, Photos and Bookmarks relating to Mouthpiece Work. > > To see and modify your groups, go to http://groups.yahoo.com/mygroups > > > ------------------------------------------------------------------------ > Yahoo! Groups Links > > * To visit your group on the web, go to: > http://groups.yahoo.com/group/MouthpieceWork/ > > * To unsubscribe from this group, send an email to: > MouthpieceWork-unsubscribe@yahoogroups.com > <mailto:MouthpieceWork-unsubscribe@yahoogroups.com?subject=Unsubscribe> > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service <http://docs.yahoo.com/info/terms/>. > >
FROM: kymarto (Toby)
SUBJECT: Re: Tip Gauges
Hi Steve,
I would definitely be interested in one.
Toby
----- Original Message -----
From: Steve Fowler
To: MouthpieceWork@yahoogroups.com
Sent: Thursday, January 13, 2005 1:11 AM
Subject: [MouthpieceWork] Tip Gauges
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
b.. To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Re: Tip Gauges
With a jp email server, I may have to charge a little more than $4.00
shipping! :-)
Whatever it costs me... okay?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
_____
From: Toby [mailto:kymarto123@...]
Sent: Thursday, January 13, 2005 7:58 AM
To: MouthpieceWork@yahoogroups.com
Subject: Re: [MouthpieceWork] Tip Gauges
Hi Steve,
I would definitely be interested in one.
Toby
----- Original Message -----
From: Steve <mailto:steve@...> Fowler
To: MouthpieceWork@yahoogroups.com
Sent: Thursday, January 13, 2005 1:11 AM
Subject: [MouthpieceWork] Tip Gauges
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator.
Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the
Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the
Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
* To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
<mailto:MouthpieceWork-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
FROM: mdc5220 (michael d. collins)
SUBJECT: Re: Tip Gauges
okay with me.
----- Original Message -----
From: Steve Fowler
To: MouthpieceWork@yahoogroups.com
Sent: Thursday, January 13, 2005 9:10 AM
Subject: RE: [MouthpieceWork] Tip Gauges
With a jp email server, I may have to charge a little more than $4.00 shipping! :-)
Whatever it costs me... okay?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com
------------------------------------------------------------------------------
From: Toby [mailto:kymarto123@...]
Sent: Thursday, January 13, 2005 7:58 AM
To: MouthpieceWork@yahoogroups.com
Subject: Re: [MouthpieceWork] Tip Gauges
Hi Steve,
I would definitely be interested in one.
Toby
----- Original Message -----
From: Steve Fowler
To: MouthpieceWork@yahoogroups.com
Sent: Thursday, January 13, 2005 1:11 AM
Subject: [MouthpieceWork] Tip Gauges
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
b.. To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Tip Gauges
The tip gauge will be a 2 1/4" round dial gauge on 1/4" thick by 1" wide
aluminum stock with a stop against which to place the tip of the mouthpiece.
Nothing fancy. Harbor Freight has the gauges frequently at $7.00 each! (1/2
price) as they do now.
I'll buy the parts and start the machining as soon as some of your money
begins to show up in my PayPal account (steve@...). Let's figure
$4.00 flat shipping rate and see if I can do it that way. So everybody send
me money! ($29.00) Please allow 4 to 6 weeks as Harbor Freight frequently
can take 3 weeks to deliver.
Thanks.
Steve
Mouthpiece Tip Gauges
Email Name Quantity
res03peo@... Joseph Lopez MD 2
kwbradbury@... Keith Bradbury 1
<mailto:dandjmars@...> dandjmars@... Dan Marsteller 2
mvprod@... Mike Vaccaro 2
<mailto:fred_bloggs_ca@...> fred_bloggs_ca@...
merlin_williams_toronto 1
<mailto:keith_ley@...> keith_ley@... Keith Ley 1
steveg@... STEVE GOODSON 1
chedoggy@... michael d. collins 1
tenorman@... Paul Coats 1
<mailto:reedman@...> reedman@... Jeff Chan 1
kymarto123@... Toby
1
Total 14
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: tenor_sax04 (italomenconi@...)
SUBJECT: unsubscribe
Mensaje citado por: Toby <kymarto123@...>: > Hi Steve, > > I would definitely be interested in one. > > Toby > ----- Original Message ----- > From: Steve Fowler > To: MouthpieceWork@yahoogroups.com > Sent: Thursday, January 13, 2005 1:11 AM > Subject: [MouthpieceWork] Tip Gauges > > > I'm thinking of making up some tip gauges using a 2 1/4" dial > indicator. Would there be any interest if I can keep the price around > $25.00 each? > > Steve > > ====================================== > > Steve Fowler > > Fowler Music Service > -------- Custom Band Instrument Repairs -------- > ------ Plating in Silver and Gold ------ > > 602 Kent Avenue > Pasadena, MD 21122 > 410-647-9537 > > www.fowlermusic.com > > > > > Got a Mouthpiece Work question? Send it to > MouthpieceWork@yahoogroups.com > > Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see > the Files, Photos and Bookmarks relating to Mouthpiece Work. > > To see and modify your groups, go to http://groups.yahoo.com/mygroups > > > > > ----------------------------------------------------------------------------- - > Yahoo! Groups Links > > a.. To visit your group on the web, go to: > http://groups.yahoo.com/group/MouthpieceWork/ > > b.. To unsubscribe from this group, send an email to: > MouthpieceWork-unsubscribe@yahoogroups.com > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service. > > Profesor: ITALO MENCONI. UNIVERSIDAD DEL VALLE DE MEXICO-CAMPUS LOMAS VERDES. ------------------------------------------------- www.correo.unam.mx UNAMonos Comunic�ndonos
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Re: unsubscribe
Okay... I guess I'll just wait for an address! :-) Cute!
Steve
======================================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
_____
From: italomenconi@... [mailto:italomenconi@correo.unam.mx]
Sent: Thursday, January 13, 2005 10:23 AM
To: MouthpieceWork@yahoogroups.com;
MouthpieceWork-unsubscribe@yahoogroups.com
Subject: [MouthpieceWork] unsubscribe
Mensaje citado por: Toby <kymarto123@...>:
> Hi Steve,
>
> I would definitely be interested in one.
>
> Toby
> ----- Original Message -----
> From: Steve Fowler
> To: MouthpieceWork@yahoogroups.com
> Sent: Thursday, January 13, 2005 1:11 AM
> Subject: [MouthpieceWork] Tip Gauges
>
>
> I'm thinking of making up some tip gauges using a 2 1/4" dial
> indicator. Would there be any interest if I can keep the price around
> $25.00 each?
>
> Steve
>
> ======================================
>
> Steve Fowler
>
> Fowler Music Service
> -------- Custom Band Instrument Repairs --------
> ------ Plating in Silver and Gold ------
>
> 602 Kent Avenue
> Pasadena, MD 21122
> 410-647-9537
>
> www.fowlermusic.com
>
>
>
>
> Got a Mouthpiece Work question? Send it to
> MouthpieceWork@yahoogroups.com
>
> Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see
> the Files, Photos and Bookmarks relating to Mouthpiece Work.
>
> To see and modify your groups, go to http://groups.yahoo.com/mygroups
>
>
>
>
>
----------------------------------------------------------------------------
-
-
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/MouthpieceWork/
>
> b.. To unsubscribe from this group, send an email to:
> MouthpieceWork-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
Profesor: ITALO MENCONI.
UNIVERSIDAD DEL VALLE DE MEXICO-CAMPUS LOMAS VERDES.
-------------------------------------------------
www.correo.unam.mx
UNAMonos Comunicándonos
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the
Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
* To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
<mailto:MouthpieceWork-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Tip Gauges
For those that would prefer to send a check, my address is below in my
signature.
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: yh3119 (yh3119)
SUBJECT: Re: Tip Gauges
Steve, Please add me to your list for the tip gauge. I have just sent the $29.00 through pay pal. email: cass_2@... Thanks, James Stevens. --- In MouthpieceWork@yahoogroups.com, "Steve Fowler" <steve@f...> wrote: > The tip gauge will be a 2 1/4" round dial gauge on 1/4" thick by 1" wide > aluminum stock with a stop against which to place the tip of the mouthpiece. > Nothing fancy. Harbor Freight has the gauges frequently at $7.00 each! (1/2 > price) as they do now. > > I'll buy the parts and start the machining as soon as some of your money > begins to show up in my PayPal account (steve@f...). Let's figure > $4.00 flat shipping rate and see if I can do it that way. So everybody send > me money! ($29.00) Please allow 4 to 6 weeks as Harbor Freight frequently > can take 3 weeks to deliver. > > Thanks. > > Steve > > > Mouthpiece Tip Gauges > > Email Name Quantity > > res03peo@g... Joseph Lopez MD 2 > kwbradbury@y... Keith Bradbury 1 > <mailto:dandjmars@a...> dandjmars@a... Dan Marsteller 2 > mvprod@a... Mike Vaccaro 2 > <mailto:fred_bloggs_ca@y...> fred_bloggs_ca@y... > merlin_williams_toronto 1 > <mailto:keith_ley@h...> keith_ley@h... Keith Ley 1 > > steveg@s... STEVE GOODSON 1 > chedoggy@e... michael d. collins 1 > tenorman@t... Paul Coats 1 > <mailto:reedman@s...> reedman@s... Jeff Chan 1 > kymarto123@y... Toby > 1 > Total 14 > > > > =================== > > Steve Fowler > > Fowler Music Service > -------- Custom Band Instrument Repairs -------- > ------ Plating in Silver and Gold ------ > > 602 Kent Avenue > Pasadena, MD 21122 > 410-647-9537 > > www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Re: Tip Gauges
Gotcha!
Steve
======================================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
_____
From: yh3119 [mailto:cass_2@...]
Sent: Thursday, January 13, 2005 11:31 AM
To: MouthpieceWork@yahoogroups.com
Subject: [MouthpieceWork] Re: Tip Gauges
Steve,
Please add me to your list for the tip gauge.
I have just sent the $29.00 through pay pal.
email: cass_2@...
Thanks,
James Stevens.
--- In MouthpieceWork@yahoogroups.com, "Steve Fowler" <steve@f...>
wrote:
> The tip gauge will be a 2 1/4" round dial gauge on 1/4" thick by 1"
wide
> aluminum stock with a stop against which to place the tip of the
mouthpiece.
> Nothing fancy. Harbor Freight has the gauges frequently at $7.00
each! (1/2
> price) as they do now.
>
> I'll buy the parts and start the machining as soon as some of your
money
> begins to show up in my PayPal account (steve@f...). Let's figure
> $4.00 flat shipping rate and see if I can do it that way. So
everybody send
> me money! ($29.00) Please allow 4 to 6 weeks as Harbor Freight
frequently
> can take 3 weeks to deliver.
>
> Thanks.
>
> Steve
>
>
> Mouthpiece Tip Gauges
>
> Email Name Quantity
>
> res03peo@g... Joseph Lopez MD 2
> kwbradbury@y... Keith Bradbury 1
> <mailto:dandjmars@a...> dandjmars@a... Dan Marsteller 2
> mvprod@a... Mike Vaccaro 2
> <mailto:fred_bloggs_ca@y...> fred_bloggs_ca@y...
> merlin_williams_toronto 1
> <mailto:keith_ley@h...> keith_ley@h... Keith Ley 1
>
> steveg@s... STEVE GOODSON 1
> chedoggy@e... michael d. collins 1
> tenorman@t... Paul Coats 1
> <mailto:reedman@s...> reedman@s... Jeff Chan 1
> kymarto123@y... Toby
> 1
> Total 14
>
>
>
> ======================================
>
> Steve Fowler
>
> Fowler Music Service
> -------- Custom Band Instrument Repairs --------
> ------ Plating in Silver and Gold ------
>
> 602 Kent Avenue
> Pasadena, MD 21122
> 410-647-9537
>
> www.fowlermusic.com <http://www.fowlermusic.com/>
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the
Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129ukprit/M=298184.5639630.6699735.3001176/D=gr
plch/S=1705032198:HM/EXP=1105720281/A=2495202/R=0/SIG=11evjk50a/*http://www.
netflix.com/Default?mqso=60188913> click here
<http://us.adserver.yahoo.com/l?M=298184.5639630.6699735.3001176/D=grplch/S=
:HM/A=2495202/rand=852137580>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
* To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
<mailto:MouthpieceWork-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
FROM: kymarto (Toby)
SUBJECT: Re: Tip Gauges
Hi Steve,
I was going to mention about the shipping...Sure, whatever it costs you, or alternately I could give you a US shipping address.
Thanks,
Toby
----- Original Message -----
From: Steve Fowler
To: MouthpieceWork@yahoogroups.com
Sent: Thursday, January 13, 2005 11:10 PM
Subject: RE: [MouthpieceWork] Tip Gauges
With a jp email server, I may have to charge a little more than $4.00 shipping! :-)
Whatever it costs me... okay?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com
------------------------------------------------------------------------------
From: Toby [mailto:kymarto123@...]
Sent: Thursday, January 13, 2005 7:58 AM
To: MouthpieceWork@yahoogroups.com
Subject: Re: [MouthpieceWork] Tip Gauges
Hi Steve,
I would definitely be interested in one.
Toby
----- Original Message -----
From: Steve Fowler
To: MouthpieceWork@yahoogroups.com
Sent: Thursday, January 13, 2005 1:11 AM
Subject: [MouthpieceWork] Tip Gauges
I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. Would there be any interest if I can keep the price around $25.00 each?
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
b.. To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FROM: mvprod7991 (mvprod7991)
SUBJECT: Re: Tip Gauges
Steve. As you probably know by now I have sent payment through paypal for 2 tip guages. Thanks for doing this. Mike Vaccaro www.mikevaccaro.com 800-449-8975 --- In MouthpieceWork@yahoogroups.com, "Steve Fowler" <steve@f...> wrote: > For those that would prefer to send a check, my address is below in my > signature. > > Steve > > =================== > > Steve Fowler > > Fowler Music Service > -------- Custom Band Instrument Repairs -------- > ------ Plating in Silver and Gold ------ > > 602 Kent Avenue > Pasadena, MD 21122 > 410-647-9537 > > www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Re: Tip Gauges
Got it.
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
_____
From: mvprod7991 [mailto:MVPROD@...]
Sent: Friday, January 14, 2005 2:05 PM
To: MouthpieceWork@yahoogroups.com
Subject: [MouthpieceWork] Re: Tip Gauges
Steve.
As you probably know by now I have sent payment through paypal for 2
tip guages. Thanks for doing this.
Mike Vaccaro
www.mikevaccaro.com
800-449-8975
--- In MouthpieceWork@yahoogroups.com, "Steve Fowler" <steve@f...>
wrote:
> For those that would prefer to send a check, my address is below in
my
> signature.
>
> Steve
>
> ===================
>
> Steve Fowler
>
> Fowler Music Service
> -------- Custom Band Instrument Repairs --------
> ------ Plating in Silver and Gold ------
>
> 602 Kent Avenue
> Pasadena, MD 21122
> 410-647-9537
>
> www.fowlermusic.com <http://www.fowlermusic.com/>
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the
Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
* To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
<mailto:MouthpieceWork-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
FROM: sjrosner (sjrosner)
SUBJECT: Re: Tip Gauges
Steve, I would be interested in one, especially if it had a long enough foot to do bari mouthpieces...jeff --- In MouthpieceWork@yahoogroups.com, "Toby" <kymarto123@y...> wrote: > Hi Steve, > > I would definitely be interested in one. > > Toby > ----- Original Message ----- > From: Steve Fowler > To: MouthpieceWork@yahoogroups.com > Sent: Thursday, January 13, 2005 1:11 AM > Subject: [MouthpieceWork] Tip Gauges > > > I'm thinking of making up some tip gauges using a 2 1/4" dial indicator. Would there be any interest if I can keep the price around $25.00 each? > > Steve > > =================== > > Steve Fowler > > Fowler Music Service > -------- Custom Band Instrument Repairs -------- > ------ Plating in Silver and Gold ------ > > 602 Kent Avenue > Pasadena, MD 21122 > 410-647-9537 > > www.fowlermusic.com > > > > > Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com > > Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the Files, Photos and Bookmarks relating to Mouthpiece Work. > > To see and modify your groups, go to http://groups.yahoo.com/mygroups > > > > ------------------------------------------------------------------------------ > Yahoo! Groups Links > > a.. To visit your group on the web, go to: > http://groups.yahoo.com/group/MouthpieceWork/ > > b.. To unsubscribe from this group, send an email to: > MouthpieceWork-unsubscribe@yahoogroups.com > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Re: Tip Gauges
How long is long enough for you? The one planned will be 4" overall which
will leave about 3 1/2" from the stop to the end of the plate. I would think
that to be fine. However, I can make one extra long if you would like.
Steve
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
_____
From: sjrosner [mailto:sjrosner@...]
Sent: Saturday, January 15, 2005 3:47 PM
To: MouthpieceWork@yahoogroups.com
Subject: [MouthpieceWork] Re: Tip Gauges
Steve,
I would be interested in one, especially if it had a long enough foot
to do bari mouthpieces...jeff
--- In MouthpieceWork@yahoogroups.com, "Toby" <kymarto123@y...> wrote:
> Hi Steve,
>
> I would definitely be interested in one.
>
> Toby
> ----- Original Message -----
> From: Steve Fowler
> To: MouthpieceWork@yahoogroups.com
> Sent: Thursday, January 13, 2005 1:11 AM
> Subject: [MouthpieceWork] Tip Gauges
>
>
> I'm thinking of making up some tip gauges using a 2 1/4" dial
indicator. Would there be any interest if I can keep the price around
$25.00 each?
>
> Steve
>
> ===================
>
> Steve Fowler
>
> Fowler Music Service
> -------- Custom Band Instrument Repairs --------
> ------ Plating in Silver and Gold ------
>
> 602 Kent Avenue
> Pasadena, MD 21122
> 410-647-9537
>
> www.fowlermusic.com
>
>
>
>
> Got a Mouthpiece Work question? Send it to
MouthpieceWork@yahoogroups.com
>
> Visit the site at http://groups.yahoo.com/group/MouthpieceWork to
see the Files, Photos and Bookmarks relating to Mouthpiece Work.
>
> To see and modify your groups, go to http://groups.yahoo.com/mygroups
>
>
>
>
----------------------------------------------------------------------------
--
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/MouthpieceWork/
>
> b.. To unsubscribe from this group, send an email to:
> MouthpieceWork-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
Got a Mouthpiece Work question? Send it to MouthpieceWork@yahoogroups.com
Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the
Files, Photos and Bookmarks relating to Mouthpiece Work.
To see and modify your groups, go to http://groups.yahoo.com/mygroups
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/MouthpieceWork/
* To unsubscribe from this group, send an email to:
MouthpieceWork-unsubscribe@yahoogroups.com
<mailto:MouthpieceWork-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
FROM: stevefowler1176 (Steve Fowler)
SUBJECT: Tip Gauges
Well, it's official! In a true testament to the integrity of the people that
are a part of this really cool group, I have received the last payment from
all that have ordered gauges. To me, that is really beyond expectations!
Thanks, everyone.
Here is the final list:
Mouthpiece Tip Gauges
Email Name Quantity
<mailto:res03peo@...> res03peo@... Joseph Lopez MD 2
<mailto:kwbradbury@...> kwbradbury@... Keith Bradbury 1
<mailto:dandjmars@...> dandjmars@... Dan Marsteller 2
<mailto:mvprod@...> mvprod@... Mike Vaccaro 2
<mailto:fred_bloggs_ca@...> fred_bloggs_ca@... Merlin
Williams 1
<mailto:keith_ley@...> keith_ley@... Keith Ley 1
<mailto:steveg@...> steveg@... Steve Goodson 1
<mailto:chedoggy@...> chedoggy@... Michael Collins
1
<mailto:tenorman@...> tenorman@... Paul Coats 1
<mailto:reedman@...> reedman@... Jeff Chan 1
<mailto:kymarto123@...> kymarto123@... Toby Marshall 1
<mailto:ralph.hopper@...> ralph.hopper@... Ralph
Hopper 1
<mailto:cass_1@...> cass_1@... James Stevens 1
<mailto:fritz@...> fritz@... Fritz Whitney 1
<mailto:jwarburton@...> jwarburton@... James Warburton
1
<mailto:jsrmd@...> jsrmd@... John Richmond 1
<mailto:clarinet@...> clarinet@... Ben Redwine
2
<mailto:cpaok@...> cpaok@... Mark Weinstein 1
<mailto:rossmac1@...> rossmac1@... Ross McIntyre 1
<mailto:sjrosner@...> sjrosner@... Jeff Rosner
1
<mailto:henk.spies@...> henk.spies@... Henk Spies 1
<mailto:coadou.trefeil@...> coadou.trefeil@... Jacques
Trefeil 1
<mailto:phil_brewer@...> phil_brewer@... Phil Brewer
1
jimlem@... Jim Lemke 1
dtorosian@... Dan Torosian 1
kchan@... Kenwrick Chan 1
sigmund451@... Philip Engleman 1
===================
Steve Fowler
Fowler Music Service
-------- Custom Band Instrument Repairs --------
------ Plating in Silver and Gold ------
602 Kent Avenue
Pasadena, MD 21122
410-647-9537
www.fowlermusic.com <http://www.fowlermusic.com/>
FROM: mctenor123 (mctenor123)
SUBJECT: unsubscribe
Please unsubscribe for the next time.
FROM: entropicwolf (Lance)
SUBJECT: Re: unsubscribe
What is this suppose to mean?
--- On Wed, 3/3/10, mctenor123 <1184-800@onlinehome.de> wrote:
From: mctenor123 <1184-800@...>
Subject: [MouthpieceWork] unsubscribe
To: MouthpieceWork@yahoogroups.com
Date: Wednesday, March 3, 2010, 2:08 AM
Please unsubscribe for the next time.
FROM: tenorman1952 (tenorman1952)
SUBJECT: Re: unsubscribe
--- In MouthpieceWork@yahoogroups.com, "mctenor123" <1184-800@...> wrote: > > Please unsubscribe for the next time. > You may unsubscribe or change settings (for example, to view posts only on the web) at any time by clicking the blue "Edit Membership" near the top of the group web page. Then, in the lower right corner click the button "Leave the group". Paul C.
FROM: kwbradbury (Keith Bradbury)
SUBJECT: Re: unsubscribe
Many members do not know how to get removed from the group mailing list. Some old listserve forums used to allow members to unsubscribe by sending an Email with the subject as "unsubscribe" to get them dropped. Yahoo Groups do not work this way. Yahoo Groups do allow members to to change their membership status and how the messages are sent or not sent.
When I see messages like this I just assume the member wants to be deleted and does not know how to do it themselves. So I delete them.
________________________________
From: Lance <entropicwolf@...>
To: MouthpieceWork@yahoogroups.com
Sent: Wed, March 3, 2010 5:02:28 AM
Subject: Re: [MouthpieceWork] unsubscribe
What is this suppose to mean?
--- On Wed, 3/3/10, mctenor123 <1184-800@onlinehome .de> wrote:
>From: mctenor123 <1184-800@onlinehome .de>
>Subject: [MouthpieceWork] unsubscribe
>To: MouthpieceWork@ yahoogroups. com
>Date: Wednesday, March 3, 2010, 2:08 AM
>
>
>
>Please unsubscribe for the next time.
>
>
FROM: entropicwolf (Lance)
SUBJECT: Re: unsubscribe
Thanks for the explanation. I myself have learned so much by just following the threads in this group. This and Saxophone Repair have provided a wealth of information for folks like myself. I know this has been a real education and I appreciate all the folks who choose to participate.
--- On Wed, 3/3/10, Keith Bradbury <kwbradbury@...> wrote:
From: Keith Bradbury <kwbradbury@...>
Subject: Re: [MouthpieceWork] unsubscribe
To: MouthpieceWork@yahoogroups.com
Date: Wednesday, March 3, 2010, 10:44 AM
Many members do not know how to get removed from the group mailing list. Some old listserve forums used to allow members to unsubscribe by sending an Email with the subject as "unsubscribe" to get them dropped. Yahoo Groups do not work this way. Yahoo Groups do allow members to to change their membership status and how the messages are sent or not sent.
When I see messages like this I just assume the member wants to be deleted and does not know how to do it themselves. So I delete them.
From: Lance <entropicwolf@ yahoo.com>
To: MouthpieceWork@ yahoogroups. com
Sent: Wed, March 3, 2010 5:02:28 AM
Subject: Re: [MouthpieceWork] unsubscribe
What is this suppose to mean?
--- On Wed, 3/3/10, mctenor123 <1184-800@onlinehome .de> wrote:
From: mctenor123 <1184-800@onlinehome .de>
Subject: [MouthpieceWork] unsubscribe
To: MouthpieceWork@ yahoogroups. com
Date: Wednesday, March 3, 2010, 2:08 AM
Please unsubscribe for the next time.