Has anyone got a facing chart for a HR "Florida" Otto Link (4* to 5* 
is what I'm looking for)? Since I don't know which feelers are 
supposed to be used for each of the lengths given, it's probably a 
good idea to sa which ones are at which lengths, just to make sure I 
don't misunderstand things.

Alternatively, if anyone has a facing for Getz's mpc's from 
the "Bossa" period (of course, the real facing would be more useful 
than a contrived one, but who knows if Joe's old boss actually had 
the real facing or not???), that would be a great help. This is for 
the Rico Royal mpc that I said about earlier (obviously I'm going to 
grind out the baffle and chamber to be more like a Link's chamber).

Thanks in advance.

Danny

> Alternatively, if anyone has a facing for Getz's mpc's... 

From "Joe" on SOTW (again we can not verify this info):

Stan Getz 
Metal Link STM 
87 tip 
27-20-13-10-6 1/2 (in mm.) Note: Most glass gauges are marked in 1/2 
mm. 
Rico #3 reeds 

Feelers .0015, .010, .024, .034, .050 

Getz did play on a lot of different pieces, but this was his favorite 
facing on metal Links as he had several Links done to this facing. 

From something else that was put onto the SOTW list, Getz seemed to 
use Ben Harrod, so it makes me wonder if Joe's old boss actually did 
do the Getz pieces, of whether it's just another one of those "I 
think Getz would use this facing" things...

Also there are a few "Pompano" Otto Links. Is Pompano another 
mouthpiece refacer, or is this some sort of special model?

Danny

--- In MouthpieceWork@y..., "Keith Bradbury" <kwbradbury@y...> wrote:
> > Alternatively, if anyone has a facing for Getz's mpc's... 
> 
> From "Joe" on SOTW (again we can not verify this info):
> 
> Stan Getz 
> Metal Link STM 
> 87 tip 
> 27-20-13-10-6 1/2 (in mm.) Note: Most glass gauges are marked in 
1/2 
> mm. 
> Rico #3 reeds 
> 
> Feelers .0015, .010, .024, .034, .050 
> 
> Getz did play on a lot of different pieces, but this was his 
favorite 
> facing on metal Links as he had several Links done to this facing.

"Florida" Links were made in Pompano Beach, Florida.  Hence the reference to 
"Pompano".



>From: "Danny Barrett" <danny_tb@...>
>Reply-To: MouthpieceWork@yahoogroups.com
>To: MouthpieceWork@yahoogroups.com
>Subject: [MouthpieceWork] Re: HR Florida Otto Link Facing Chart
>Date: Mon, 04 Nov 2002 22:10:37 -0000
>
>From something else that was put onto the SOTW list, Getz seemed to
>use Ben Harrod, so it makes me wonder if Joe's old boss actually did
>do the Getz pieces, of whether it's just another one of those "I
>think Getz would use this facing" things...
>
>Also there are a few "Pompano" Otto Links. Is Pompano another
>mouthpiece refacer, or is this some sort of special model?
>
>Danny
>
>--- In MouthpieceWork@y..., "Keith Bradbury" <kwbradbury@y...> wrote:
> > > Alternatively, if anyone has a facing for Getz's mpc's...
> >
> > From "Joe" on SOTW (again we can not verify this info):
> >
> > Stan Getz
> > Metal Link STM
> > 87 tip
> > 27-20-13-10-6 1/2 (in mm.) Note: Most glass gauges are marked in
>1/2
> > mm.
> > Rico #3 reeds
> >
> > Feelers .0015, .010, .024, .034, .050
> >
> > Getz did play on a lot of different pieces, but this was his
>favorite
> > facing on metal Links as he had several Links done to this facing.
>
>
>Got a Mouthpiece Work question?  Send it to MouthpieceWork@yahoogroups.com
>
>Visit the site at http://groups.yahoo.com/group/MouthpieceWork to see the 
>Files, Photos and Bookmarks relating to Mouthpiece Work.
>
>To see and modify your groups, go to http://groups.yahoo.com/mygroups
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


_________________________________________________________________
Surf the Web without missing calls! Get MSN Broadband. 
http://resourcecenter.msn.com/access/plans/freeactivation.asp

Thanks for that.

DB

--- In MouthpieceWork@y..., "Mike Ruhl" <mikeruhl@h...> wrote:
> "Florida" Links were made in Pompano Beach, Florida.  Hence the 
reference to 
> "Pompano".
> 
> 
> 
> >From: "Danny Barrett" <danny_tb@y...>
> >Reply-To: MouthpieceWork@y...
> >To: MouthpieceWork@y...
> >Subject: [MouthpieceWork] Re: HR Florida Otto Link Facing Chart
> >Date: Mon, 04 Nov 2002 22:10:37 -0000
> >
> >From something else that was put onto the SOTW list, Getz seemed to
> >use Ben Harrod, so it makes me wonder if Joe's old boss actually 
did
> >do the Getz pieces, of whether it's just another one of those "I
> >think Getz would use this facing" things...
> >
> >Also there are a few "Pompano" Otto Links. Is Pompano another
> >mouthpiece refacer, or is this some sort of special model?
> >
> >Danny
> >
> >--- In MouthpieceWork@y..., "Keith Bradbury" <kwbradbury@y...> 
wrote:
> > > > Alternatively, if anyone has a facing for Getz's mpc's...
> > >
> > > From "Joe" on SOTW (again we can not verify this info):
> > >
> > > Stan Getz
> > > Metal Link STM
> > > 87 tip
> > > 27-20-13-10-6 1/2 (in mm.) Note: Most glass gauges are marked in
> >1/2
> > > mm.
> > > Rico #3 reeds
> > >
> > > Feelers .0015, .010, .024, .034, .050
> > >
> > > Getz did play on a lot of different pieces, but this was his
> >favorite
> > > facing on metal Links as he had several Links done to this 
facing.
> >
> >
> >Got a Mouthpiece Work question?  Send it to MouthpieceWork@y...
> >
> >Visit the site at http://groups.yahoo.com/group/MouthpieceWork to 
see the 
> >Files, Photos and Bookmarks relating to Mouthpiece Work.
> >
> >To see and modify your groups, go to 
http://groups.yahoo.com/mygroups
> >
> >Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/
> 
> 
> _________________________________________________________________
> Surf the Web without missing calls! Get MSN Broadband. 
> http://resourcecenter.msn.com/access/plans/freeactivation.asp